Appendix G
Call Commands
Table G-3
Call Command Behaviors (continued)
Context
CALL WAITING: Cisco ATA 186 is connected
to two far end users on the same line; one of
them is in active conversation (the active far end
or AFE) while the other is on-hold (the waiting
far end or WFE). This state is initially entered
when the Cisco ATA 186 is connected to one of
the far end while the other far end call into the
Cisco ATA 186
3WAYCALLING: Cisco ATA 186 is connected
to two far end users on the same line; one of
them is in active conversation (the active far end
or AFE) while the other is on-hold (the waiting
far end or WFE). This state is initially entered
when the Cisco ATA 186 is connected to one of
the far end, then places this far end on hold and
call the second far end
CONFERENCE: Cisco ATA 186 is connected
to two active far end simultaneously;
Cisco ATA 186 performs audio mixing such
that evey party can hear the other two parties but
not themselves
PREDIAL_HOLDING: Cisco ATA 186 user
places a connected call on-hold and prepares to
dial a second number; Cisco ATA 186 plays
dial-tone
OL-1267-01
Commands
US:
R: Place the AFE on-hold and retrieve the
WFE;(ONH: Transfer the WFE to the AFE, drop out
of the call, and goto PREDIAL;)SwedenR1:
Disconnect current call, answer the waiting call, and
goto CONNECTED;R2: Place the AFE on-hold and
retrieve the WFE;R3: Retrieve the WFE, and goto
CONFERENCE;(R4: Transfer the WFE to the AFE,
drop out of the call, and goto PREDIAL;)
US
R: Retrieve the WFE and goto
CONFERENCE;(ONH: Transfer the WFE to the
AFE, drop out of the call, and goto PREDIAL;)
Sweden
Same as in CALLWAITING state
USR: Disconnect the last callee and stay connected
with the first party, and revert to
CONNECTEDSweden(R4: Transfer one FE to the
other, drop out of the call, and goto PREDIAL;)
US *,#: Stop dial-tone, goto CONFIG_HOLDING,
and prepare to collect a configuration command;0-9:
Stop dial-tone, goto DIALING_HOLDING, and
prepare to complete dialing a second phone number;
SwedenSame as USAll RegionsR: Stop dial-tone,
retrieve the WFE, and revert to CONNECTED
Cisco ATA 186 Installation and Configuration Guide
Syntax
G-11