Appendix; Dial Plan Parameters And Defaults; About Programmable Dial Plans - Cisco ATA186-I1 Installation And Configuration Manual

Dial Plan Parameters and Defaults

This appendix provides information on the dial plan parameters and defaults that
you can use to provision your Cisco ATA 186. You cannot configure the dial plan
by using voice input; you must use the web browser or autoprovisioning.

About Programmable Dial Plans

The programmable dial plan allows the service provider to customize the way the
Cisco ATA 186 reads and sends the sequence of digits input by the user. In
general, the dial plan defines which sequences of digits will be recognized by the
Cisco ATA 186 as valid dial strings, suitable to send through the network (e.g.,
555-1212, 1-408-555-1212, 011 46 8 1234 1234). Additionally, the dial plan
specifies:
OL-1267-01
An optional send character (for example, # or *) which, when entered, will
•
automatically send the dial string).
The number of digits to look for before the dial string is automatically sent.
•
The timeout (in seconds) between when the last digit is entered and when the
•
Cisco ATA 186 sends the dial string. The timeout can be programmed to
change value in mid-dial string.
A P P E N D I X
Cisco ATA 186 Installation and Configuration Guide
D
D-1