Cisco ATA186-I1 Installation And Configuration Manual page 104

Provisioning Parameters
Table B-2 TFTP Provisioning Parameters and Defaults
Parameter
TftpURL
ToConfig
UseTFTP
Cisco ATA 186 Installation and Configuration Guide
B-4
Value
Type Description
Alpha- IP address or URL of the TFTP
numeric server to use. This is needed if the
string Dynamic Host Configuration
Protocol (DHCP) does not give the
TFTP address. You can optionally
include the path prefix to the TFTP
file to download. For example, if the
TFTP server IP address is
192.168.2.170 or www.cisco.com,
and the path to download the TFTP
file is in /ata186, then you can
specify the URL as
192.168.2.170/ata186 or
www.cisco.com/ata186.
From the IVR, you can
Note
only enter the IP address;
from the web server, you
can enter the actual URL.
Boolean The default is 1. This indicates that
the operating parameters of the box
have not previously been set. Once
the Cisco ATA 186 has been
provisioned, set the parameter to 0,
or the Cisco ATA 186 will
unnecessarily contact the TFTP
server.
Boolean 1 means use TFTP for provisioning;
0 means do not.
There are two additional parameters that are used to control the upgrade of the
firmware code and language. The values of these parameters depend on the
software release.
Appendix B Parameters and Defaults
IVR Access
Code Default
905 0
80001 0
305 1
OL-1267-01