Table of Contents
Advertisement
Chapter 3
Configuring the Cisco ATA 186
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
About Autoprovisioning
OL-1267-01
Make sure that the PC and the Cisco ATA 186 are already networked and visible
to one another.
Open your web browser.
Enter the URL of your configuration page. The URL of the web server is:
IP Address/dev
For example, the configuration page for a Cisco ATA 186 with the IP address
192.168.3.225 is:
http://192.168.3.225/dev
See
"Using the Web Configuration Page" section on page 3-4
how to find the IP address of your Cisco ATA 186.
Select the values for the items that you want to configure. (See
"Parameters and Defaults,"
parameters. You can password-protect the user interface for security.
Click apply to save your changes.
Close your web browser.
For large-scale networks, you can use a TFTP server to host a profile for each
Cisco ATA 186. The TFTP server's URL and file name can be provided
(provisioned) from the DHCP server.
Set UseTFTP to 1.
TftpURL is the IP address of the TFTP server. If TftpURL is set to 0, the DHCP
server will supply the IP address.
Name the file to be downloaded according to the format:
ataxxxxxxxxxxxx
Each xx is the 2-digit lower case hexadecimal representation of each integer in the
MAC address of the Cisco ATA 186.
for a list of options.) Scroll down to see all
Cisco ATA 186 Installation and Configuration Guide
About Autoprovisioning
for information on
Appendix B,
3-5
Advertisement
Table of Contents
Troubleshooting
