Table of Contents
Advertisement
Configuring Supplementary Services
This chapter includes information on supplementary services for the applicable
protocols. Supplementary services are services that you can use to enhance your
telephone service. The features must be enabled in:
Changing Call Commands
To change the command for a supplementary service (for example, to change *69
to *100), change the context identifiers by changing the call command field in the
web browser on the provisioning page.
You cannot change supplementary services by using the IVR, and you cannot
Note
change timeout values.
Cancelling a Supplementary Service
Some features, such as call waiting, are disabled automatically when you hang up.
You can also deactivate them manually by pressing *70 before a call. In the case
of call waiting, the second caller hears a busy signal. You can also configure your
system to have the services disabled by default and enabled on a call-by-call basis.
This is done in the 32-bit "Call Features" plan.
OL-1267-01
Paid Services - the features your customers subscribe to.
•
Call Features - the services you are subscribed to. You can turn these features
•
on and off.
C H A P T E R
Cisco ATA 186 Installation and Configuration Guide
5
5-1
Advertisement
Table of Contents
Troubleshooting
