Debugging - Cisco ATA186-I1 Installation And Configuration Manual

Chapter 8 Testing and Troubleshooting the Cisco ATA 186

Debugging

Caution
OL-1267-01
A debugging tool, prserv, is available from TAC. The pserv program is used in
conjunction with the NPrintf configuration parameter. Contact Cisco for more
information. See Obtaining Technical Assistance, page
Debug commands that you can use on your Cisco IOS are
debug RAS
and
debug H225 ASN1
You should also have access to a "sniffer" or LAN analyzer.
For security reasons, Cisco recommends that you do not use the web interface
over the public network. Disable the web interface by using the UIPassword
parameter before the Cisco ATA 186 leaves the service provider site.
Cisco ATA 186 Installation and Configuration Guide
Contacting TAC
-xviii, for instructions.
8-9