Syntax
Table G-3
Call Command Behaviors
Context
IDLE: Phone is on-hook; Cisco ATA 186 is
waiting for incoming call
PREDIAL: Phone just went off-hook but no
DTMF entered yet; Cisco ATA 186 plays
dial-tone
DIALING: User entering phone number, which
is parsed with the given dial-plan rules
Cisco ATA 186 Installation and Configuration Guide
G-8
The notations used in the table are:
FE: Far end
•
AFE: Active Far End, a connected far end which is not placed on hold
•
•
WFE: Waiting Far End, a connected far end which is being placed on hold,
or an incoming caller waiting to be answered
•
R: Hook Flash
ONH: On Hook
•
•
OFH: Off Hook
•
0-9,*,#: DTMF digits
v: a variable length string, usually a phone number, and does not include '#'
•
•
CWT: call waiting tone
Commands
OFH: Start dial-tone and goto PREDIAL;New
incoming call, or a waiting call (started before it
enters IDLE): Start ringing the phone and goto
RINGING
US and Sweden
# , * : Stop dial-tone, goto CONFIG, and prepare to
accept a complete configuration sequence; 0-9: Stop
dial-tone, start invoking dial-plan rules, and goto
DIALING to accept a complete phone number
R: Abort dialing, restarts dial-tone, and revert to
PREDIAL;Invalid phone number: Abort dialing,
plays fast-busy, and goto WAITHOOK;
Appendix G
Call Commands
OL-1267-01