Cisco ATA186-I1 Installation And Configuration Manual page 117

Appendix B Parameters and Defaults
Table B-4 H.323 Operating Parameters and Defaults
Parameter
AltGk
AltGkTimeOut
GateWay
GkId
GkTimeToLive
LoginId0, LoginId1 Alpha-
Table B-5 SIP Parameters
Parameter Value Type Description
MAXRedirect Integer
MediaPort Integer
NATIP IP
OL-1267-01
Value
Type Description
Alpha- Alternate gatekeeper
numeric
ConnectMode bit 3 (mask
Note
string
0x8) controls whether
alternate gatekeeper
needs to register.
Integer Alternate gatekeeper timeout value
in seconds.
Alpha- Gateway IP, if gatekeeper is not used
numeric for routing calls. 31 characters
string maximum.
Alpha- Gatekeeper zone ID. 31 characters
numeric maximum.
string
Integer Gatekeeper time to live value.
H.323 or SIP Login ID for line 0 and
numeric 1. For H323, this is needed if
string AuthMethod is set to 1. For SIP,
UID0 and UID1 are used for
authentication if UseLoginID is 0. 19
characters maximum.
Maximum number of times to try redirection. 205
Base port to receive RTP media; currently
only used to support SIP behind a NAT.
WAN address of the attached router/NAT;
currently only used to support SIP behind a
NAT.
IVR Access
Code
6
251
11
91
250
LoginId0, 46
LoginId1, 47
Cisco ATA 186 Installation and Configuration Guide
Operating Parameters
Default
0
0
0
.
300
0
IVR Access
Code Default
5
202 10000
200 0.0.0.0
B-17