Configuring the Cisco ATA 186
This chapter provides information about configuring the Cisco ATA 186.
There are three ways to configure your Cisco ATA 186:
Configuration Requirements
The Cisco ATA 186 requires the following minimum settings for network
connectivity:
• IP address
• Network route address (IP gateway)
• Subnet mask
To enter an IP address, press the * key to indicate a delimiter (dot). For
Note
example,
your Cisco ATA 186 has been installed correctly, lift the telephone handset
and enter 21#.
OL-1267-01
Voice Configuration Menu
•
Web browser
•
Autoprovisioning
•
. To hear the IP address of your Cisco ATA 186, after
192*168*3*1
C H A P T E R
Cisco ATA 186 Installation and Configuration Guide
3
3-1