Testing And Troubleshooting The Cisco Ata; Testing The Cisco Ata 186 Configuration; Making A Call - Cisco ATA186-I1 Installation And Configuration Manual

Testing and Troubleshooting the
Cisco ATA 186
This chapter describes how to test and troubleshoot the Cisco ATA 186.

Testing the Cisco ATA 186 Configuration

To test your Cisco ATA 186 configuration:
Lift the primary line telephone handset.
Step 1
Step 2 If you are not in SIP mode, enter your user ID (UID).
If you hear a dial tone, your Cisco ATA 186 is properly configured.
Step 3

Making a Call

The dial plan described in these instructions is the default plan. You can
Note
configure your Cisco ATA 186 to use a different plan.
Follow these steps to make a call:
Lift the telephone handset.
Step 1
OL-1267-01
C H A P T E R
Cisco ATA 186 Installation and Configuration Guide
8
8-1