Appendix; Parameters And Defaults - Cisco ATA186-I1 Installation And Configuration Manual

Parameters and Defaults

This Appendix provides information on the parameters and defaults that you can
use to provision your Cisco ATA 186.
Provisioning files must begin with #txt for the formating tool, cfgfmt.exe, to treat
it as text file.
Begin at new line indicates a comment.
All parameter/value pairs are optional but might be needed for the
Cisco ATA 186 to function properly if a value has not already been programmed.
Where an IVR Access Code is available, you can use either the alphanumeric
entry method or a numeric entry method to specify the value of the parameter
using an IVR alternate interface. Convert the hexadecimal value to decimal when
using the IVR alternate interface (numeric entry method) before you manually
enter the value by using IVR.
Parameter values can be one of the following types:
•
•
•
•
•
•
•
•
OL-1267-01
alphanumeric string
numeric digit string
array of short integer
IP address (e.g. 192.168.2.170)
Extended IP address—IP address with Port (for example,
192.168.2.170.9001)
boolean (1 or 0)
bitmap value—unsigned hex integer (for specifying bits in 32-bit integer)
integer (32 bit integer).
A P P E N D I X
Cisco ATA 186 Installation and Configuration Guide
B
B-1