Table of Contents
Advertisement
Table A-1
Voice Menu Options in Alphabetical Order
Option
Dynamic Host Configuration
Protocol (DHCP)
0=Disable
1=Enable (Default)
Diagnostic Information
DNS 1 IP
DNS 2 IP
Encrypt Key
Num Tx Frames
Values: 1 through 12
Default=2
Gatekeeper ID
Gatekeeper/Proxy Server IP
Address
Gatekeeper time to live
Gateway IP Address
IP Address
IP Dial Plan
LBR Codec
Login ID 0
Login ID 1
Media port
Network Route Address
Cisco ATA 186 Installation and Configuration Guide
A-2
Item Number
Description
20
This command controls whether the
Cisco ATA 186 can automatically obtain
configuration parameters from a server over the
network.
411
916
917
320
35
Select the number of frames per packet to be
transmitted when using the audio codec G.723.1
or G.729A.
91
(H.323)
5
Enter the gatekeeper or proxy server IP address.
250
(H.323) Enter the amount of idle time before the
gatekeeper times out.
11
(H.323) Enter the IP address of the gateway. This
number can be automatically assigned when
DHCP is enabled.
1
Enter the IP address of the Cisco ATA 186. This
number can be automatically assigned when
DHCP is enabled.
310
300
46
47
202
(SIP)
2
Enter the network route address. This number can
be automatically assigned when DHCP is enabled.
Appendix A
Voice Menu Options
OL-1267-01
Advertisement
Table of Contents
Troubleshooting
