Cisco ATA186-I1 Installation And Configuration Manual page 142

Syntax
Table G-3 Call Command Behaviors (continued)
Context
RINGING: Cisco ATA 186 is ringing the phone
to alert user of an incoming call
CONNECTED: The Cisco ATA 186 is
connected with one far end party;
Cisco ATA 186 may be the caller or the callee
WAITHOOK: Far end hangs up while in
CONNECTED state; Cisco ATA 186 plays
fast-busy after 5 seconds in this state
CONNECTED_ALERTING: Cisco ATA 186
receives another call while in CONNECTED
state; Cisco ATA 186 plays Call Waiting tone
periodically (every 10 seconds for US; l second
for Sweden)
Cisco ATA 186 Installation and Configuration Guide
G-10
Commands
OFH: Stop ringing, answer the call, and goto
CONNECTED
US and Sweden:
R: Hold current call, play dial-tone to dial 2nd
number, and goto PREDIAL_HOLDING
R: Stop fast-busy, start dial-tone, and goto PREDIAL
US:
R: Place current call on-hold, answer the waiting
call, and goto CALLWAITING;
Sweden:
R0: Continue current call, reject (say busy to) the
waiting call, and revert to CONNECTED;
R1: Disconnect current call, answer the waiting call,
and goto CONNECTED;
R2: Place current call on-hold, answer waiting call,
and goto CALLWAITING;
R3: Continue with current call, answer the waiting
call and goto CONFERENCE;
All Regions
ONH: Disconnect current call and goto IDLE (in
which Cisco ATA 186 automatically starts ringing
the phone, and goto RINGING);
AFE hangs up: Goto WAITHOOK_ALERTING,
continue to play CWT;
WFE cancels the call: Stop CWT and revert to
CONNECTED
Appendix G Call Commands
OL-1267-01