Cisco ATA186-I1 Installation And Configuration Manual page 96

Table A-2 Voice Menu Options in Numerical Order
Item Number Option
13 UID 1
14 PWD 1
20 Dynamic Host Configuration
Protocol (DHCP)
0=Disable
1=Enable (Default)
21 Review IP Address
22 Review Network Route IP
Address
23 Review Subnet Mask
24 Review MAC Address
35 Num Tx Frames
Values: 1 through 12.
Default=2
36 Rx Codec
0=G.723.1 (default)
1=G.711A
2=G.711µ
3=G.729A
37 Tx Codec
0=G.723.1 (default)
1=G.711A
2=G.711µ
3=G.729A
Cisco ATA 186 Installation and Configuration Guide
A-6
Appendix A
Description
Enter the User ID (telephone number) for the
Phone 2 port.
Enter the password associated with the second
gatekeeper account.
This command controls whether the
Cisco ATA 186 can automatically obtain
configuration parameters from a server over the
network.
Listen to the IP address.
Listen to the IP address of the network route.
Listen to the subnet mask.
Listen to the media access control (MAC)
address.
Select the number of frames per packet to be
transmitted when using the audio codec G.723.1
or G.729A.
Select the audio codec type to use to decode
received data. The call-receiving station
automatically adjusts to the call-initiating
station's audio codec type if the call-receiving
station supports that audio codec.
Select the audio codec type to use to encode data
for transmission. The audio codec type for
receiving does not have to be the same as the
audio codec type for transmitting.
Voice Menu Options
OL-1267-01