Installing the Cisco ATA 186
This chapter provides information about installing the Cisco ATA 186.
English is the default language. For information on the upgrade process, see
Chapter 6, "Upgrading the Cisco ATA 186 Software."
Installation Overview
The general steps necessary to install the Cisco ATA 186 are:
OL-1267-01
1.
Plan the network and Cisco ATA 186 configuration.
Install the Ethernet connection.
2.
3.
Install and configure the other network devices; for example, gatekeeper if
you are using H.323 or proxy server if you are using SIP.
4.
If you will be routing calls through the Public Switched Telephone Network
(PSTN), install and configure the Gateway.
Install the Cisco ATA 186.
5.
Configure the Cisco ATA 186.
6.
Perform any troubleshooting and maintenance, including upgrading the
7.
software if necessary.
C H A P T E R
Cisco ATA 186 Installation and Configuration Guide
2
2-1