5860 Remote Annunciator Installation; 1: Mounting The 5860 - Honeywell 6820 Manual

5860 Remote Annunciator Installation

4.8 5860 Remote Annunciator Installation
The 5860 is an optional remote annunciator. Up to 16 annunciators can be added to the 6820 system.
5860 installation involves the following steps:
1. Ensure the power is off at the panel.
2. Mount the 5860 in the desired location (see Section 4.8.1).
3. Connect the 5860 to the panel (see Figure 4.22).
4. Use the DIP switches on the back of the 5860to assign an ID# to the annunciator (see Section 4.15.1).
5. The new 5860 module must be added to the system through programming. JumpStart will add the module automatically (see
Section 8.6.7). You can also add it manually (see Section 8.2.2). Select a name, if desired.
4.8.1 Mounting the 5860
This section of the manual describes mounting the remote annunciator. The annunciator can be flush- or surface-mounted. Figure 4.19 shows
the parts of the annunciator. Instructions for disassembling and mounting appear on the following pages.
6820/EVS Manual — P/N LS10144-001SK-E:E 4/6/2022
FIRE ALARM ANNUNCIATOR
Figure 4.18 5860 Remote Annunciator
Figure 4.19 5860 Annunciator Parts
FIRE ALARM ANNUNCIATOR
Control Panel Installation
37