Sync Network Options - Honeywell 6820 Manual

Sync Network Options

8. Select the tone to be played between messages. (High-Lo, ANSI Whoop, Cont. Whoop, ANSI, March Code, California, Steady, Alert
Tone, or No Tones).
NOTE: 520Hz tones are available when using the ECS-VCM, EVS-INT50W, or EVS-100W amplifiers. These include ANSI 520, Temp 4 520,
Steady 520. See the Device Compatibility Document for a list of compatible speakers.
9. Select how many times you want the message to repeat. (None, 1 - 14, or Continuous).
10. Select the initial delay time (0, 3, 4, 8, 12, 16, 20, 24, 28).
11. Select the inter message delay time (4 to 32 seconds, in 4 second increments).
12. Select Y or N to allow message to continue to play after Mic release.
13. Select Y or N to allow message to restart on a new activation.
6.4 Sync Network Options
If after making changes to network programming, the distribution of network options fail, the system will report a trouble of network options
out of sync. Use this menu to redistribute changed options to the rest of the network. The user will be required to choose a panel to source the
options from. Scroll down through the informational message and press ENTER to view the Select Source screen.
1. Login to the panel. The panel will automatically access the Main Menu.
2. Select 6 for Network Programming Menu.
3. Select 8 for Sync Network Options.
4. Select which panel to source the options from.
Select Source
01= Panel 1
02= Panel 2
03= Panel 3
Select the line number. #1 in this example.
NOTE: If you try to sync with the network and an incompatible panel is found, an error message will display.
6820/EVS Manual — P/N LS10144-001SK-E:E 4/6/2022
Select Source
01= 07/28/21 12:20 OF
02 Panel 2
03 Panel 3
Line #1 scrolls to show the date.
Figure 6.2 Sync Network Options
Network Management
Select Source
01=/28/21 12:20 OF8B
02 Panel 2
03 Panel 3
Scroll down to see checksum.
71