Programming Using An Annunciator; 1: Entering / Exiting Panel Programming - Honeywell 6820 Manual

Programming Using an Annunciator

7.4 Programming Using an Annunciator
You can program the control panel from a system annunciator, using either the control panel's onboard annunciator or a 6860, 6855, or 5860
remote annunciator.
The following subsections describe programming basics, including a description of editing keys available for programming and how to move
through programming menus. Section 8 contains specific information about individual programming options.
NOTE: Output mapping cannot be programmed through the onboard and remote annunciators. Mapping is only available through the HFSS
Honeywell Fire Software Suite.
7.4.1 Entering / Exiting Panel Programming
Entering Program Mode
1. Login to the panel. (Refer to Section 9.2.1).
2. Select 7 for the Programming Menu. See Section 8 for detailed information and Section 7.5 for a quick reference listing all
programmable options and JumpStart defaults.
Exiting Program Mode
When you have completed working with the menus, press the left arrow several times until you exit from the Programming Mode. Two
prompts will display. At the first prompt, a message appears indicating to exit the Program Menu (select Yes or No as appropriate). At the
second prompt, a message indicates if the user accepts all changes. If you select No, any changes you have made since you entered the Pro-
gram Menu will have no effect.
Moving Through the Menus
Figure 7.7 shows how to move through the menu screens, using the main menu screen as an example.
Menu Name
selected option
(displays next to
equal sign)
Selecting Options and Entering Data
There are several ways to make programming selections using the control panel depending on which screen you are currently viewing. The
chart below is a generic explanation.
To
Select from a menu
Enter numeric data
Enter text (alphanumeric data)
Select from a scrolling list
6820/EVS Manual — P/N LS10144-001SK-E:E 4/6/2022
Main Menu
1=System Tests
2 Point Functions
3 Event History
Figure 7.7 Moving Through the Program Menu
Enter the number of the option.
Press the appropriate number on the annunciator.
Enter each character individually using the Up and Down arrow keys until the one you wish to select
displays. Then press right arrow to select the character. See Appendix A for a complete list of
characters.
Use up arrow and down arrow to move through a list of available options. When the option you want
to select is displayed, press ENTER.
Table 7.1 Menu Options
Arrow indicates more screens.
Press the down arrow key to access.
Press
Programming Overview
79