2: Main Menu Overview - Honeywell 6820 Manual

Menu System
• Profile 2 is defaulted as "Installer" and profile 3 is defaulted to "Multi-Site Installer". Profiles 4-18 are empty profiles available for
assignment. User profiles 2-18 can be edited for name and panel functions. Table 9.1 lists the panel functions that can be selected for
each user profile.
Invalid Password/Panel Timeout
If a password is entered incorrectly or is not a valid password, the panel will display an error message. You must hit ENTER or the left arrow
key and re-enter the password correctly. After ten invalid attempts, the panel will panel will lock for 30 seconds and then you can try again.
However, if the password has been forgotten, record the 20-character code displayed on the panel and contact Technical Services. After
proper authentication, the password will be supplied.
9.2.2 Main Menu Overview
The chart below is a brief overview of the Main Menu. These options are described in greater detail throughout this section of the manual.
Main Menu Options
1- System Tests
2- Point Functions
3- Event History
4- Set Time & Date
5- Network Diagnostics
6- Network Programming
7- Panel Programming
8- System Information
6820/EVS Manual — P/N LS10144-001SK-E:E 4/6/2022
Type of Function
Panel Operations
Panel Menus
*Function Keys are only available on the 6860 LCD annunciator.
User Profile Selectable Panel Functions
Table 9.1
Access to Fire Drill, Indicator Test, Walk Tests, Communicator Test, Clear History Buffer, Manual AlarmNet
Registration and Manual Communicator Reset.
Enable/disable points, Point Status, SLC Single Device Locater, SLC Multiple Device Locater, and I/O Point Control.
Display event history on the LCD. See Section 9.3.3 for more information.
Set time and date for the system
Ping Panel and Data Network Status
Access Learn Network, Edit Network Names, Edit Panel ID, Computer Access, Access Codes, Communicator
Options, Voice Options, Sync Network Options
Brings up a set of menus for programming the panel. These options are described in detail in Section 8.
Menus to view information about the panel such as model, ID, serial number, revision, send or receive firmware
updates and feature registration activation
Table 9.2 Main Menu Options
Selectable Functions
System Reset
System Silence
System Ack
Fire Drill Key
*F1 Function Key
*F2 Function Key
*F3 Function Key
*F4 Function Key
System Tests
Fire Drill Menu
Indicator Test
Walk Test-No Report
Walk Test -With Report
Communicator Test
Clear History Buffer
Point Functions
Disable/Enable Point
Point Status
Set SLC Device Address
SLC Single Device Locater
SLC Multiple Device Locater
I/O Point Control
Event History
Set Time & Date
System Information
Network Diagnostics
Network Programming
Panel Programming
Send/Receive Firmware Update
Description
System Operation
113