Honeywell 6820 Manual page 137

Recording Custom Messages
2. Connect the PC to the USB port on the FACP using a standard USB cable.
3. Run the Voice Message Load software.
4. Select "Read from Panel" to read a message and store onto your hard drive, or "Write to Panel" to transfer a .SKE formatted message to
the panel.
5. Select the appropriate message location you wish to read/write.
6. Enter the file name you wish to transfer (Press "Browse" to display a list of files.)
7. Press "Start" to start the transfer.
6820/EVS Manual — P/N LS10144-001SK-E:E 4/6/2022
+
+
+
Figure 10.6 USB Cable Connections
Emergency Voice System Operation
137