What To Do Next; Rack-Mounting A Sce 2000 Platform - Cisco SFE2000P Installation And Configuration Manual

Installing the SCE 2000 Platform
2.
3.
4.
5.
DETAILED STEPS
Remove any debris and dust from the tabletop or workbench, as well as the surrounding area. Also make
Step 1
sure your path between the SCE 2000 platform and its new location is unobstructed.
Place the SCE 2000 platform on the tabletop or workbench.
Step 2
Step 3 View the bottom panel by lifting the SCE 2000 , placing your hands around the SCE 2000 sides and
lifting the SCE 2000 from underneath. To prevent injury, avoid sudden twists or moves.
There are four marked locations, indicating where to affix the rubber feet (see figure above).
Step 4 Attach the rubber feet by removing the adhesive strips and affix the rubber feet onto the marked locations
(on the bottom panel).
Step 5 Replace the SCE 2000 platform firmly on the tabletop or workbench.
Remember to check for proper ventilation. Allow at least 2 inches (5 cm) on each side for proper
ventilation and 5 inches (12.7 cm) at the back for ventilation.and power cord clearance.

What to Do Next

Proceed to section,

Rack-Mounting a SCE 2000 Platform

You can mount the SCE 2000 platform to a 19" rack. There are two standard types of equipment racks,
and the appropriate brackets for each are provided in the enclosed kit.
•
Cisco SCE 2000 4xGBE Installation and Configuration Guide
4-6
Place the SCE 2000 platform on the tabletop or workbench.
View the bottom panel by lifting the SCE 2000 , placing your hands around the SCE 2000 sides and
lifting the SCE 2000 from underneath. To prevent injury, avoid sudden twists or moves.
Attach the rubber feet by removing the adhesive strips and affix the rubber feet onto the marked
locations (on the bottom panel).
Replace the SCE 2000 platform firmly on the tabletop or workbench.
How to Attach a Chassis Ground Connection
19" rack with front rack posts — the mounting kit includes two mounting brackets as illustrated
below.
Chapter 4 Installation and Maintenance
to continue the installation.
OL-7824-06