Routing Power And Signal Cables; Parts List - Cisco 3000 Use & Care Manual

Chapter Organization
• Each element is described using one or more illustrations. The elements are:
–
–
–
–
–
–
–
–
–
–
Chapter 8, "Routing Power and Signal Cables"
• A series of illustrations are used to describe the routing and connection of all power and signal
cables.
• Illustrations show you the routing path to take for all cables.
Illustrations showing cables terminating in a Codec include a close-up of the Codec.
•
• A pointer to the first-time setup information.
Chapter 9, "First-Time Setup"
This chapter provides the procedures you perform to set up a Cisco TelePresence system for the first
•
time.
Chapter 10, "Use & Care Guide"
This chapter provides information on maintaining several elements of the
•
Cisco TelePresence System 3000, including the tabletop and plasma displays.
Chapter 11, "Field-Replaceable Unit Guide"
This chapter describes removal and replacement processes for various elements of the
•
Cisco TelePresence System 3000.
Parts List Sorted by Carton
This appendix lists all parts included in the individual chapter parts lists, and sorts the list by carton.
•
Region- and Country-Specific Equipment
This appendix lists the part numbers for all region- and country-specific equipment, including table
•
leg wiring and power cords.
Appendix B, "Cisco TelePresence System 3000 Pallet Dimensions and Description"
This appendix list the size and number of pallets, and a description of the contents of the cartons.
•
Cisco TelePresence System 3000
1-2
Camera assembly - attaches to the center Display structure
Microphone assembly - attach to the three table segments
Table Leg Wiring assembly - wired for power and network connectivity
Projector assembly - attaches to the underside of the center table segment
Privacy Panel assembly - attach to the table segments
Codec assembly - attach to each Display structure
Speaker assembly - attach to the underside of the Display shelf
Projector Screen assembly - attaches to the underside of the Display shelf
Cisco IP Phone 7975G
Camera Target assembly - used for camera focus and alignment
Chapter 1 Overview
OL-14521-01