Power Requirements for the Cisco TelePresence 3000
Step 11
Attach and route the power and signal cables for the plasma displays.
Connect the center plasma display to "UNSWITCHED" outlet of the the auxiliary control unit.
Note
Figure 8-11
Cabling the Plasma displays
Signal
Power
Note
Figure 8-11
Before you plug cables into a Codec or PDU, label each cable.
Tip
Cisco TelePresence System 3000
8-14
displays the rear view of the Cisco TelePresence System 3000. Left and right are reversed.
Chapter 8
Routing Power and Signal Cables
OL-14521-01