1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Conference System
  5. Catalyst 3000
  6. Use & care manual

Cisco 3000 Use & Care Manual

Cisco systems network device assembly guide
Hide thumbs Also See for 3000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Administration Manual
Enlarged version
Cisco TelePresence System 3000
Assembly Guide
Use & Care Guide
Field-Replaceable Unit Guide
October 31, 2008
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-14521-01

Advertisement

Table of Contents
loading

Related Manuals for Cisco 3000

Summary of Contents for Cisco 3000

  • Page 1 Cisco TelePresence System 3000 Assembly Guide Use & Care Guide Field-Replaceable Unit Guide October 31, 2008 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-14521-01...
  • Page 2 OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. CCVP, the Cisco logo, and Welcome to the Human Network are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.;...

  • Page 3: Table Of Contents

    Building the Display Shelf Assembly, Product ID CTS3K-FUR-MAPLE Building the Display Shelf Assembly, Product ID CTS3K-M-TABLE-G2 Building the Table Assembly Parts List Determining the Table Section Type OL-14521-01 C O N T E N T S i-ix i-ix 3-11 5-10 Cisco TelePresence System 3000...
  • Page 4 Cleaning the Plasma displays Cleaning the Camera lens Maintaining the Projector Field-Replaceable Unit Guide Complete List of Spares for the Cisco TelePresence System 3000 Replacing the Camera Cluster—Part Number CTS3K-CAM-CLST-G2= Required Information, Tools, and Equipment Powering Off the System Cisco TelePresence System 3000...
  • Page 5 11-6 11-7 11-7 11-7 11-8 11-8 11-14 11-14 11-14 11-14 11-16 11-16 11-16 11-16 11-18 11-18 11-18 11-18 11-21 11-21 11-22 11-26 11-28 11-28 11-30 Contents 11-6 11-8 11-19 11-20 11-21 11-22 11-23 11-25 11-27 11-28 Cisco TelePresence System 3000...
  • Page 6 Carton 28 of 44: Light Fixture, 74-5361-xx, CTS-LIGHT-FIXT Carton 29 of 44: Light Fixture, 74-5361-xx, CTS-LIGHT-FIXT Carton 30 of 44: Light Fixture, 74-5362-xx, CTS-LIGHT-FIXT Carton 31 of 44: Light Fixture, 74-5362-xx, CTS-LIGHT-FIXT Cisco TelePresence System 3000 11-30 11-30 A-10 A-10...
  • Page 7 Carton 36 of 44: Display Structure, 69-1622-xx, CTS3K-STRUCTURE Carton 37 of 44: Display Structure, 69-1622-xx, CTS3K-STRUCTURE Carton 38 of 44: Spare Fluorescent Bulbs for Light Fixture, 74-5232-01, CTS-3000-SPR-BULBS Carton 39 of 44: Projector Screen, 74-5416-xx, CTS3K-SCREEN Carton 40 of 44: Display Shelves and Codec Tray, 69-1626-xx, CTS3K-STRUCTURE...
  • Page 8 Contents Cisco TelePresence System 3000 viii OL-14521-01...

  • Page 9: Preface

    Revised: October 31, 2008, OL-14521-01 Introduction The Cisco TelePresence 3000 Assembly Guide outlines the steps and best practices for assembling and installing the Cisco TelePresence 3000. This guide is intended primarily for installers of the Cisco TelePresence System 3000. Site planners, network administrators, and facility maintenance personnel may also find this document useful.

  • Page 10: Obtaining Documentation, Obtaining Support, And Security Guidelines I-X

    Release Notes for Cisco TelePresence System, Release 1.4, OL-12074-05 Cisco TelePresence Meeting User’s Guide, 78-17791-01 • Cisco TelePresence System Release 1.4 Meeting Quick Reference, 78-17792-02 • All of these documents are available at the Cisco documentation website. Cisco TelePresence System 3000 Preface OL-14521-01...

  • Page 11: Overview

    Chapter 7, “Assembling the Remaining Cisco TelePresence Elements” • This chapter is organized the same as Chapter 2. • Each element has a Parts List at the beginning of the chapter. OL-14521-01 C H A P T E R (this chapter) Cisco TelePresence System 3000...

  • Page 12: Routing Power And Signal Cables

    Chapter 10, “Use & Care Guide” This chapter provides information on maintaining several elements of the • Cisco TelePresence System 3000, including the tabletop and plasma displays. Chapter 11, “Field-Replaceable Unit Guide” This chapter describes removal and replacement processes for various elements of the •...

  • Page 13: Assembly Overview

    Chapter 1 Overview Figure 1-1 View of an Assembled Cisco TelePresence System 3000 Assembly Overview Perform the following steps to install a CTS 3000: Step 1 Build the display assembly. See Step 2 Mount and level the plasma displays. See more information.

  • Page 14: Conventions And Terminology

    Two dots on a white background indicate a left element. – – Three dots on a red background indicate a right element. Cisco TelePresence System 3000 Step 2 Step 3 Chapter 7, “Assembling the Remaining Cisco TelePresence to install the I/O modules and cables and to install the codecs and to connect the signal cables between the codecs and plasma displays.

  • Page 15: Tools And Equipment List

    Chapter 1 Overview Figure 1-2 Tools and Equipment List To assemble the Cisco TelePresence 3000, you need the following tools and equipment: Uncrating and Unpacking: Claw hammer or small pry bar • Large Phillips screwdriver • Tin snips* • Pallet jack or hand cart (for moving component boxes to installation site)* •...
  • Page 16 Chapter 1 Overview Tools and Equipment List Cisco TelePresence System 3000 OL-14521-01...

  • Page 17: Building The Display Assembly

    35, 36, 37 (CTS3K-FUR- MAPLE) 32, 33, 34 (CTS3K-M-TABLE- 700-23360-xx 700-23359-xx 14, 15, 16 51-4540-xx 700-23339-xx 40 (CTS3K-FUR- MAPLE) (CTS3K-M-TABLE- 700-23340-xx 40 (CTS3K-FUR- MAPLE) (CTS3K-M-TABLE- 700-23363-xx 700-23341-xx 40 (CTS3K-FUR- MAPLE) (CTS3K-M-TABLE- 700-23346-xx Notes For center display structure only Cisco TelePresence System 3000...
  • Page 18 Figure 2-1 The structure becomes heavier and more difficult to move during the building process. Note the correct positioning of the display structure; keep this in mind as you build the structure. Cisco TelePresence System 3000 Part Number 700-23361-xx 33 (CTS3K-FUR-...
  • Page 19 If you ordered a Presentation Codec, attach the larger tray that comes with the Presentation Codec Note package, part no. 700-25301-xx, in the center display. For instructions to install the presentation codec, refer to the “Options for the Cisco TelePresence System 3000” chapter of the Cisco TelePresence Hardware Options and Upgrade Guide.
  • Page 20 Chapter 2 Building the Display Assembly Parts List Step 3 Attach the Rear and Front Foot stabilizers to the Display structures. Figure 2-3 Rear and Front Foot stabilizers 12 11 Cisco TelePresence System 3000 OL-14521-01...
  • Page 21 Chapter 2 Building the Display Assembly Parts List Step 4 Attach the left and right Display Shelf supports to each Display structure. Figure 2-4 Left and Right Display Shelf supports Cisco TelePresence System 3000 OL-14521-01...
  • Page 22 Attach the Display Tilt brackets to each Display structure. Figure 2-5 Display Tilt brackets Do not tighten the Display Tilt brackets. You will need to adjust them to level the Plasma displays in Note Chapter 3, “Mounting and Leveling the Plasma Displays.” Cisco TelePresence System 3000 OL-14521-01...
  • Page 23 Chapter 2 Building the Display Assembly Parts List Step 6 Attach the Camera Assembly bracket to the center Display structure. Figure 2-6 Camera Assembly bracket The Camera Assembly bracket attaches to the center Display structure. Note Cisco TelePresence System 3000 OL-14521-01...
  • Page 24 Parts List Step 7 Attach the upper and lower Support crossbars to the left and right Display structures. Figure 2-7 Upper and Lower Support crossbars Use the screw holes nearest the ends of the Support crossbars. Cisco TelePresence System 3000 OL-14521-01...
  • Page 25 Chapter 2 Building the Display Assembly Step 8 Attach the upper and lower Support crossbars to the center Display structure. Figure 2-8 Upper and Lower Support crossbars OL-14521-01 Parts List Cisco TelePresence System 3000...
  • Page 26 If your room size and room lighting pattern allow extra space, add extra space to these minimum measurements. Figure 2-9 Positioning the Display Structures Minimum 24 inches Minimum 12 inches (30.5 cm) Minimum 24 inches (70 cm) (70 cm) Cisco TelePresence System 3000 2-10 OL-14521-01...

  • Page 27: Mounting And Leveling The Plasma Displays

    Plasma displays. You may want to Notes The Display shelves are used in this chapter for leveling purposes only. The Display shelves and the attaching bracketing hardware are described in Chapter 5, Building the Display Shelf Assembly. Cisco TelePresence System 3000...

  • Page 28: Parts List

    Some system components have metal and plastic edges with hard angles. These edges are exposed until Caution you complete system assembly. Use caution when you move around the system during assembly to avoid contact with any exposed system edges. Cisco TelePresence System 3000 OL-14521-01...
  • Page 29 The displays are heavy and may cause injury or damage if care is not taken to support them properly Warning while mounting. Use caution and additional assistance as needed. OL-14521-01 The left, center, and right Plasma displays Parts List Cisco TelePresence System 3000...
  • Page 30 Chapter 5, Building the Display Shelf Assembly. Use the M8 x 20 mm screws in the Accessory Kit to attach the Display shelves. Refer to Chapter 5 for more information. Cisco TelePresence System 3000 OL-14521-01...

  • Page 31: Purpose Of Leveling The Plasma Displays

    Use the leveling alignment points to level and align the Plasma displays. Step 3 Figure 3-3 Leveling Alignment Points You can use a 5 mm hex key to adjust the display structure’s front and rear Foot Levelers. Note OL-14521-01 Purpose of Leveling the Plasma displays Cisco TelePresence System 3000...

  • Page 32: Leveling Goals

    Leveling the Display shelves insures the Display structures are level. The Display structures should be level before attempting to level the Plasma displays. Figure 3-4 Level the Display shelves along the X and Y axes Cisco TelePresence System 3000 OL-14521-01...
  • Page 33 Leveling feet to raise or lower the Plasma displays and make sure all lines of resolution can be seen when sitting at the conference table. Figure 3-5 Make sure no lines of resolution are blocked by the Display shelves Cisco TelePresence System 3000 OL-14521-01...
  • Page 34 You should level the center Plasma display first. Then align the left and right Plasma displays to the center display. Figure 3-6 Level the Plasma displays along the X and Y axes Do not place the level against the Plasma display screen. Place the level against the Plasma display Caution frame. Cisco TelePresence System 3000 OL-14521-01...
  • Page 35 The gap between Plasma displays should be uniformly even from the top edge of the Plasma display to the bottom edge. You should try to make the gap as small as possible. Figure 3-7 Align the edges of Plasma displays Cisco TelePresence System 3000 OL-14521-01...
  • Page 36 While moving the Plasma display to the left or right you need to make sure the Plasma display Caution Leveling feet remain firmly seated on top of the Display shelf supports. Figure 3-8 Cisco TelePresence System 3000 3-10 Align the seams of the Display shelves with the seams between Plasma displays Chapter 3...

  • Page 37: Completing The Plasma Display Setup

    Chapter 3 Mounting and Leveling the Plasma Displays Completing the Plasma display setup Completing the Plasma display setup Apply the Black Buffer strips Step 9 Figure 3-9 Apply the Black Buffer strips Cisco TelePresence System 3000 3-11 OL-14521-01...
  • Page 38 Chapter 3 Mounting and Leveling the Plasma Displays Completing the Plasma display setup Cisco TelePresence System 3000 3-12 OL-14521-01...

  • Page 39: Building The Lighting Assembly

    700-23748-xx 26 (CTS3K-FUR-MAPLE) 23 (CTS3K-M-TABLE-G2) 700-23899-xx 26 (CTS3K-FUR-MAPLE) 23 (CTS3K-M-TABLE-G2) 700-24126-xx 26 (CTS3K-FUR-MAPLE) 23 (CTS3K-M-TABLE-G2) 700-23897-xx 26 (CTS3K-FUR-MAPLE) 23 (CTS3K-M-TABLE-G2) 700-23898-xx 26 (CTS3K-FUR-MAPLE) 23 (CTS3K-M-TABLE-G2) 700-23896-xx 26 (CTS3K-FUR-MAPLE) 23 (CTS3K-M-TABLE-G2) 700-23826-xx 26 (CTS3K-FUR-MAPLE) 23 (CTS3K-M-TABLE-G2) Cisco TelePresence System 3000 Notes...
  • Page 40 M8 x 70 mm screws M8 x 20 mm screws M8 x 12 mm flat-head screws Diffuser Panel braces / H-clips Compliance sticker for plasma display Touch-up paint, white Cisco TelePresence System 3000 Part Number Qty Ctn 700-23827-xx 26 (CTS3K-FUR-MAPLE) 23 (CTS3K-M-TABLE-G2)
  • Page 41 Metal and plastic edges can be sharp. Cisco recommends you wear safety gloves and safety glasses when Caution attaching the lighting assembly. The directions left and right refer to the assembly as you face the Plasma displays. Note OL-14521-01 Parts List Cisco TelePresence System 3000...
  • Page 42 Chapter 4 Building the Lighting Assembly Parts List Assemble the six Support struts and six Lighting Support brackets. Step 1 Figure 4-1 Support struts and Lighting Support brackets Cisco TelePresence System 3000 OL-14521-01...
  • Page 43 There is no physical difference between the six Support brackets assembled in two can be used as outer Support brackets. OL-14521-01 Left and Right outer Support brackets (from Figure 4-1) to the horizontal bar on the left and Figure 4-1) Figure Cisco TelePresence System 3000 Parts List 4-1. Any...
  • Page 44 Attach the four inner Support brackets to the Support crossbars. Figure 4-3 There is no physical difference between the six Support brackets assembled in Note two can be used as outer Support brackets. Cisco TelePresence System 3000 Four inner Support brackets (from Figure Chapter 4 Building the Lighting Assembly...
  • Page 45 Chapter 4 Building the Lighting Assembly Parts List Step 4 Attach the four End structure brackets to the ends of the Support crossbars. Figure 4-4 Four End structure brackets Cisco TelePresence System 3000 OL-14521-01...
  • Page 46 Chapter 4 Building the Lighting Assembly Parts List Step 5 Attach the three Reflector bottom trays to the Support brackets. Figure 4-5 Three Reflector bottom trays Cisco TelePresence System 3000 OL-14521-01...
  • Page 47 Chapter 4 Building the Lighting Assembly Parts List Step 6 Attach the two Reflector bottom spacers to join the three Reflector bottom trays. Figure 4-6 Two Reflector bottom spacers Cisco TelePresence System 3000 OL-14521-01...
  • Page 48 Attach the left and right (vertical) Reflector Bottom ends to the End Structure brackets and attach the compliance sticker to the left reflector bottom end. Figure 4-7 Left and Right (vertical) Reflector Bottom ends Cisco TelePresence System 3000 4-10 Chapter 4 Building the Lighting Assembly...
  • Page 49 Chapter 4 Building the Lighting Assembly Parts List Step 8 Attach the Light Cup bracket to the left and right (vertical) Reflector Bottom ends. Figure 4-8 Light Cup bracket Cisco TelePresence System 3000 4-11 OL-14521-01...
  • Page 50 Chapter 4 Building the Lighting Assembly Parts List Step 9 Attach the three 5-foot Light fixtures inside the Reflector bottoms. Figure 4-9 Three 5-foot Light fixtures Cisco TelePresence System 3000 4-12 OL-14521-01...
  • Page 51 Attach the left and right 4-foot Side Light fixtures to the left and right (vertical) Reflector Bottom ends. The power cords for the Side Light fixtures should extend from the top of the fixtures (Figure 4-8). Figure 4-10 Left and Right 4-foot Side Light fixtures Cisco TelePresence System 3000 4-13 OL-14521-01...
  • Page 52 Chapter 4 Building the Lighting Assembly Parts List Step 11 Attach the two center Metal Trim panels. Figure 4-11 Two center Metal Trim panels Cisco TelePresence System 3000 4-14 OL-14521-01...
  • Page 53 Chapter 4 Building the Lighting Assembly Parts List Step 12 Attach the two side Metal Trim panels. Figure 4-12 Two side Metal Trim panels Cisco TelePresence System 3000 4-15 OL-14521-01...
  • Page 54 Chapter 4 Building the Lighting Assembly Parts List Step 13 Attach the center Plastic Diffuser panel. Figure 4-13 Center Plastic Diffuser panel Cisco TelePresence System 3000 4-16 OL-14521-01...
  • Page 55 Parts List Step 14 Attach the left and right Plastic Diffuser panels. The rounded corners of the left and right Plastic Diffuser panels point outward. Note Figure 4-14 Left and Right Plastic Diffuser panels Cisco TelePresence System 3000 4-17 OL-14521-01...
  • Page 56 Chapter 4 Building the Lighting Assembly Parts List Step 15 Attach the four L-brackets to the two (vertical) end Plastic Diffuser panels. Figure 4-15 Four L-brackets Cisco TelePresence System 3000 4-18 OL-14521-01...
  • Page 57 Chapter 4 Building the Lighting Assembly Parts List Step 16 Attach the two (vertical) Plastic Diffuser panels to the End Structure brackets. Figure 4-16 Two (vertical) Plastic Diffuser panels Cisco TelePresence System 3000 4-19 OL-14521-01...
  • Page 58 Slide the Plastic Diffuser Panel brace between the end (vertical) Plastic Diffuser panel and the left and right Plastic Diffuser panels. If the diffuser becomes scratched, use a black felt-tip permanent marker to cover the Note imperfection. Figure 4-17 Plastic Diffuser Panel brace Cisco TelePresence System 3000 4-20 Chapter 4 Building the Lighting Assembly OL-14521-01...
  • Page 59 Chapter 4 Building the Lighting Assembly Parts List Step 18 Attach the center Reflector top to the center Reflector bottom. Do not tighten screws until completing Figure 4-22. Note Figure 4-18 Center Reflector top Cisco TelePresence System 3000 4-21 OL-14521-01...
  • Page 60 Parts List Step 19 Attach the left and right Reflector tops to the left and right Reflector bottoms. Do not tighten screws until completing Figure 4-22. Note Figure 4-19 Left and Right Reflector tops Cisco TelePresence System 3000 4-22 OL-14521-01...
  • Page 61 Step 20 Join the left, center, and right Reflector tops with the left and right Reflector Transition pieces. Do not tighten screws until completing Figure 4-22. Note Figure 4-20 Left and Right Reflector Transition pieces Cisco TelePresence System 3000 4-23 OL-14521-01...
  • Page 62 Attach the left and right (vertical) Reflector ends to the left and right (vertical) Reflector Bottom ends. Do not tighten screws until completing Figure 4-22. Note Figure 4-21 Left and Right (vertical) Reflector ends Cisco TelePresence System 3000 4-24 OL-14521-01...
  • Page 63 Tighten all screws from Note pieces form a “seamless hood” around the lighting assembly. Figure 4-22 Left and Right corner Reflector Transition pieces OL-14521-01 Figure 4-18 through Figure 4-22. The goal is to insure the reflector Cisco TelePresence System 3000 Parts List 4-25...
  • Page 64 These Metal Trim panels cover the access opening used to route cables. You may not want to Note attach these Metal Trim panels until you complete the cable routing in Power and Signal Cables.” Figure 4-23 Two Metal Trim panels Cisco TelePresence System 3000 4-26 Chapter 4 Building the Lighting Assembly Chapter 8, “Routing OL-14521-01...

  • Page 65: Building The Display Shelf Assembly

    Accessory cabinet, right Accessory cabinet, left OL-14521-01 Part Number 700-23600-xx 700-23598-xx 700-23336-xx 700-23337-xx 700-23345-xx 700-23909-xx 51-4579-xx 48-2273-xx 51-4580-xx 700-29441-01 42, 43 700-29442-01 42, 43 C H A P T E R Notes Included with projector screen kit. Cisco TelePresence System 3000...

  • Page 66: Key Part Description

    Speaker board brackets Splines Draw bolts M8 x 20 mm screws M4 x 12 mm pan head screws Accessory Cabinet Accessory Cabinet, Right Accessory Cabinet, Left Cisco TelePresence System 3000 Part Number No part number 69-1706-xx Part Number 74-5304-xx 95-9692-xx 74-5306-xx...

  • Page 67: Assembly Screen Supports

    Display structures, as illustrated in Determining the Display Shelf Type The CTS 3000 ships with two different types of shelves. Determine the type of shelf that you have by one of the following methods: Check the cartons that shipped with your product.
  • Page 68 Determining the Display Shelf Type – Display shelves with a product ID of CTS3K-M-TABLE-G2 use draw bolts to attach the sections. Figure 5-1 shows the attachment hardware differences. Figure 5-1 Attachment Hardware Differences 10 11 Cisco TelePresence System 3000 OL-14521-01...

  • Page 69: Building The Display Shelf Assembly, Product Id Cts3K-Fur-Maple

    Cisco TelePresence Elements.” Display structures, as illustrated in OL-14521-01 Building the Display Shelf Assembly, Product ID CTS3K-FUR-MAPLE The Display shelves should be attached individually to the Figure 5-3, Figure Chapter 7, “Assembling the Remaining 5-4, and Figure 5-5. Cisco TelePresence System 3000...
  • Page 70 Chapter 5 Building the Display Shelf Assembly Building the Display Shelf Assembly, Product ID CTS3K-FUR-MAPLE Step 2 Attach the left Display shelf. Figure 5-3 Left Display shelf Cisco TelePresence System 3000 OL-14521-01...
  • Page 71 Attach the center Display shelf Figure 5-4 Center Display shelf Refer to Note shelf. OL-14521-01 Building the Display Shelf Assembly, Product ID CTS3K-FUR-MAPLE Figure 5-2 to see the hardware used to attach the center Display shelf to the left Display Cisco TelePresence System 3000...

  • Page 72: Display Shelf Section: Left

    Attach the right Display shelf. Figure 5-5 Right Display shelf Refer to Note Display shelf. Cisco TelePresence System 3000 Figure 5-2 to see the hardware used to attach the right Display shelf to the center Chapter 5 Building the Display Shelf Assembly OL-14521-01...
  • Page 73 Note Before you attach the Accessory cabinets to the brackets, use them as supports while assembling Note the table segments in OL-14521-01 Building the Display Shelf Assembly, Product ID CTS3K-FUR-MAPLE Chapter 6, “Building the Table Assembly.” Cisco TelePresence System 3000...

  • Page 74: Building The Display Shelf Assembly, Product Id Cts3K-M-Table-G2

    This illustration describes the hardware used to attach the three Display shelves and the Note hardware used to attach additional assemblies in Cisco TelePresence Elements.” Display structures, as illustrated in Cisco TelePresence System 3000 5-10 10 11 The Display shelves should be attached individually to the Figure...
  • Page 75 Chapter 5 Building the Display Shelf Assembly Building the Display Shelf Assembly, Product ID CTS3K-M-TABLE-G2 Step 2 Attach the left Display shelf. Figure 5-8 Left Display shelf Cisco TelePresence System 3000 5-11 OL-14521-01...
  • Page 76 Attach the center Display shelf Figure 5-9 Center Display shelf Refer to Note shelf. Cisco TelePresence System 3000 5-12 Figure 5-2 to see the hardware used to attach the center Display shelf to the left Display Chapter 5 Building the Display Shelf Assembly...
  • Page 77 Figure 5-10 Right Display shelf Refer to Note Display shelf. OL-14521-01 Building the Display Shelf Assembly, Product ID CTS3K-M-TABLE-G2 Figure 5-2 to see the hardware used to attach the right Display shelf to the center Cisco TelePresence System 3000 5-13...
  • Page 78 One wall of the left Accessory cabinet was removed from this illustration for clarity. Note Note Before you attach the Accessory cabinets to the brackets, use them as supports while assembling the table segments in Cisco TelePresence System 3000 5-14 Chapter 6, “Building the Table Assembly.” Chapter 5 Building the Display Shelf Assembly...

  • Page 79: Not Used

    Part Number Notes 800-28454-xx 800-28628-xx (left) 700-24275-xx 800-28625-xx 700-23593-xx 700-23594-xx 700-23595-xx 700-23596-xx 700-23597-xx 700-23345-xx 700-23909-xx 51-4539-xx 51-4579-xx 69-1878-xx 48-2273-01 Included with Left tabletop hinge. 51-4580-xx 47-21001-xx 700-23825-xx Use the screws included with the strap to attach. Cisco TelePresence System 3000...

  • Page 80: Not Used

    “Please close” label M8 x 20 mm screws, black Phillips head wood screws Plate for left side table I/O blank: large I/O blank: small Cisco TelePresence System 3000 700-23601-xx 69-1706-xx 700-23601-xx 700-26753-xx Use these to cover screw mounting holes in the cabinet body.

  • Page 81: Accessory Cabinet, Right

    49-xx26 48-2426-xx Kit # 69-1878-xx 74-4743-xx Included in Microphone kit. Included in Microphone kit. 48-2273-xx For connecting plate 700-23333-xx 700-23334-xx 700-23332-xx 700-23362-xx 48-2273-xx 74-5298-xx Kit #69-1838-xx 69-1706-xx 74-5297-xx Kit # 69-1837-xx Parts List for the part Cisco TelePresence System 3000...

  • Page 82: Determining The Table Section Type

    Cisco suggests you use the accessory cabinets to support and stabilize the table segments as you install them. Determining the Table Section Type The CTS 3000 ships with two different types of table sections. Determine the type of section that you have by one of the following methods: •...

  • Page 83: Building The Table Assembly, Product Id Cts3K-Fur-Maple

    Building the Table Assembly, Product ID CTS3K-FUR-MAPLE Building the Table Assembly, Product ID CTS3K-FUR-MAPLE Remove the Metal packaging braces from the Molded foam bumpers. Step 1 Figure 6-1 Metal packaging braces and their Molded foam bumpers Cisco TelePresence System 3000 OL-14521-01...
  • Page 84 Steps for installing all the power and signal cables are in Note Cisco TelePresence and Signal Cables.” Figure 6-2 Four Molded foam bumpers and the four Table leg bases Cisco TelePresence System 3000 Elements.”. Steps for routing the cables are in Chapter 6 Building the Table Assembly Figure 6-10).
  • Page 85 Chapter 6 Building the Table Assembly Building the Table Assembly, Product ID CTS3K-FUR-MAPLE Step 3 Attach the Right-wing tabletop section to the right Accessory Cabinet bracket. Figure 6-3 Right-wing tabletop section Cisco TelePresence System 3000 OL-14521-01...
  • Page 86 While one person is tightening the cam lock couplings from below, it is important for the support person to maintain the alignment of the table segment edges. Figure 6-4 Right Table segment Cisco TelePresence System 3000 Chapter 6 Building the Table Assembly OL-14521-01...
  • Page 87 Chapter 6 Building the Table Assembly Building the Table Assembly, Product ID CTS3K-FUR-MAPLE Step 5 Attach the right-most Table Leg. Figure 6-5 Right-most Table Leg Cisco TelePresence System 3000 OL-14521-01...
  • Page 88 While one person is tightening the cam lock couplings from below, it is important for the support person to maintain the alignment of the table segment edges. Figure 6-6 Center Table segment Cisco TelePresence System 3000 6-10 Chapter 6 Building the Table Assembly...
  • Page 89 Chapter 6 Building the Table Assembly Building the Table Assembly, Product ID CTS3K-FUR-MAPLE Step 7 Attach the Right-center Table leg. Figure 6-7 Right-center Table leg Cisco TelePresence System 3000 6-11 OL-14521-01...
  • Page 90 While one person is tightening the cam lock couplings from below, it is important for the support person to maintain the alignment of the table segment edges. Figure 6-8 Left Table segment Cisco TelePresence System 3000 6-12 Chapter 6 Building the Table Assembly...
  • Page 91 Chapter 6 Building the Table Assembly Building the Table Assembly, Product ID CTS3K-FUR-MAPLE Step 9 Attach the left center Table leg. Figure 6-9 Left center Table leg Cisco TelePresence System 3000 6-13 OL-14521-01...
  • Page 92 The left-most Table leg is different from the other three table legs. It has only one flange on the Note right side of the leg, to attach to the left Table segment. Figure 6-10 Left-most Table leg Cisco TelePresence System 3000 6-14 Chapter 6 Building the Table Assembly OL-14521-01...
  • Page 93 Chapter 6 Building the Table Assembly Building the Table Assembly, Product ID CTS3K-FUR-MAPLE Step 11 Attach the table door. Figure 6-11 Table Door Cisco TelePresence System 3000 6-15 OL-14521-01...
  • Page 94 “please close” label to the table door. When installed, the text on the metal part of the safety strap faces the table and door. Note Figure 6-12 Label and Safety Strap Cisco TelePresence System 3000 6-16 OL-14521-01...
  • Page 95 Attach the Accessory cabinets to the left and right attachment brackets and cover the visible screw holes in the cabinet body with the cabinet hole cover. Figure 6-13 Accessory cabinets OL-14521-01 Building the Table Assembly, Product ID CTS3K-FUR-MAPLE Cisco TelePresence System 3000 6-17...

  • Page 96: Building The Table Assembly, Product Id Cts3K-M-Table-G2

    Building the Table Assembly, Product ID CTS3K-M-TABLE-G2 Building the Table Assembly, Product ID CTS3K-M-TABLE-G2 Remove the Metal packaging braces from the Molded foam bumpers. Step 1 Figure 6-14 Metal packaging braces and their Molded foam bumpers Cisco TelePresence System 3000 6-18 OL-14521-01...
  • Page 97 The leg base with only one top right attachment bracket is the left most table leg (see Note Figure 6-25). The other three legs each have two attachment brackets. Figure 6-15 OL-14521-01 Building the Table Assembly, Product ID CTS3K-M-TABLE-G2 Four Molded foam bumpers and the four Table leg bases Cisco TelePresence System 3000 6-19...
  • Page 98 Steps for routing the Ethernet and power cables are in Note The flange on the I/O module cover plate is wider on the bottom than on the top. Note Figure 6-16 Cisco TelePresence System 3000 6-20 Figure 6-17). Foam Bumper Assembly...
  • Page 99 The flange on the I/O module cover plate is wider on the bottom than on the top. Note Figure 6-17 OL-14521-01 Building the Table Assembly, Product ID CTS3K-M-TABLE-G2 Foam Bumper Assembly 22 23 24 Chapter 8, “Routing Power and Signal Cables.” Cisco TelePresence System 3000 6-21...
  • Page 100 Chapter 6 Building the Table Assembly Building the Table Assembly, Product ID CTS3K-M-TABLE-G2 Step 5 Attach the right wing tabletop section to the right Accessory Cabinet bracket. Figure 6-18 Right Wing Tabletop Section Cisco TelePresence System 3000 6-22 OL-14521-01...
  • Page 101 The splines have different lengths. Use a spline that is slightly smaller than the slot in the table top. Note Figure 6-19 Right Table segment OL-14521-01 Building the Table Assembly, Product ID CTS3K-M-TABLE-G2 Cisco TelePresence System 3000 6-23...
  • Page 102 Chapter 6 Building the Table Assembly Building the Table Assembly, Product ID CTS3K-M-TABLE-G2 Step 7 Attach the right most Table Leg. Figure 6-20 Right Most Table Leg Cisco TelePresence System 3000 6-24 OL-14521-01...
  • Page 103 The splines have different lengths. Use a spline that is slightly smaller than the slot in the table top. Note Figure 6-21 Center Table segment OL-14521-01 Building the Table Assembly, Product ID CTS3K-M-TABLE-G2 Cisco TelePresence System 3000 6-25...
  • Page 104 Chapter 6 Building the Table Assembly Building the Table Assembly, Product ID CTS3K-M-TABLE-G2 Step 9 Attach the right center Table leg. Figure 6-22 right center Table leg Cisco TelePresence System 3000 6-26 OL-14521-01...
  • Page 105 The splines have different lengths. Use a spline that is slightly smaller than the slot in the table top. Note Figure 6-23 Left Table segment OL-14521-01 Building the Table Assembly, Product ID CTS3K-M-TABLE-G2 Cisco TelePresence System 3000 6-27...
  • Page 106 Chapter 6 Building the Table Assembly Building the Table Assembly, Product ID CTS3K-M-TABLE-G2 Step 11 Attach the left center Table leg. Figure 6-24 Left center Table leg Cisco TelePresence System 3000 6-28 OL-14521-01...
  • Page 107 Chapter 6 Building the Table Assembly Building the Table Assembly, Product ID CTS3K-M-TABLE-G2 Step 12 Attach the left most Table leg. Figure 6-25 left Most Table Leg Cisco TelePresence System 3000 6-29 OL-14521-01...
  • Page 108 Projector mounting bracket. You can use tape to secure it in place. Steps for routing and connecting the microphone extension cables from the audio/video extension unit Note to the microphones are in Chapter 8, “Routing Power and Signal Cables.” Figure 6-26 Microphone Assembly Cisco TelePresence System 3000 6-30 OL-14521-01...
  • Page 109 Building the Table Assembly, Product ID CTS3K-M-TABLE-G2 Step 14 Attach the table door to the tabletop sections and attach the “please close” label to the underside of the table door. Figure 6-27 Left Connecting Tabletop Section Cisco TelePresence System 3000 6-31 OL-14521-01...
  • Page 110 Accessory cabinets Note The Right Accessory Cabinet attachment bracket (marked “4” in the illustration), has a central rectangular hole that differentiates it from the Left Accessory Cabinet attachment bracket. Cisco TelePresence System 3000 6-32 Chapter 6 Building the Table Assembly...
  • Page 111 C H A P T E R Notes Used to attach to the Camera bracket on the center Display structure. These screws are included with the camera assembly and are used to attach the top and bottom hoods to the camera assembly. Cisco TelePresence System 3000...
  • Page 112 M6 x 10 mm screws 48-1963-xx M8 washers 48-2273-xx Privacy Panel Assembly Privacy panel: 700-23333-xx center-left Cisco TelePresence System 3000 Chapter 7 Assembling the Remaining Cisco TelePresence Elements Notes Part number changes per country or region. Refer to “Region- and Country-Specific Equipment”...
  • Page 113 Products shipped to China use a different (CTS3K-FU privacy panel. See R-MAPLE) Country-Specific Equipment” number. (CTS3K-M- TABLE-G2) (CTS3K-FU R-MAPLE) (CTS3K-M- TABLE-G2) 4, 5 3, 4, 5 7, 8, 9 Cisco TelePresence System 3000 Parts List “Region- and for the part...
  • Page 114 Tabletop camera 700-24323-xx target: large Tabletop camera 700-24320-xx target: small Cisco TelePresence System 3000 Chapter 7 Assembling the Remaining Cisco TelePresence Elements Notes Included with projector screen kit. The IP Phone should be placed near the right wing Table segment to prevent it from appearing on screen.
  • Page 115 Use caution when you move around the system during assembly to avoid contact with any exposed system edges. OL-14521-01 Notes (CTS3K-FU R-MAPLE) (CTS3K-M- TABLE-G2) (CTS3K-FU R-MAPLE) (CTS3K-M- TABLE-G2) (CTS3K-FU R-MAPLE) (CTS3K-M- TABLE-G2) Cisco TelePresence System 3000 Parts List...
  • Page 116 To make adjustments, loosen the four screws on the top of the camera assembly and move the assembly forward or back as required; then, retighten the four screws. Figure 7-1 Camera Assembly Cisco TelePresence System 3000 OL-14521-01...
  • Page 117 Assemble the I/O Modules for the outside left and outside right Molded Foam bumpers. The outside left and outside right Molded Foam bumpers only have one I/O Module each. The inner Molded Foam bumpers have two (see Figure 7-3). Figure 7-2 I/O Modules for Outer Foam Bumpers Cisco TelePresence System 3000 OL-14521-01...
  • Page 118 Assemble the I/O Modules for the two inner Molded Foam bumpers. The outside left and outside right Molded Foam bumpers only have one I/O Module each (see Figure 7-2). The inner Molded Foam bumpers have two. Figure 7-3 I/O Modules Inner Foam Bumpers Cisco TelePresence System 3000 OL-14521-01...
  • Page 119 Chapter 7 Assembling the Remaining Cisco TelePresence Elements Parts List Step 4 Attach the Projector to the Projector mounting bracket. Figure 7-4 Projector Assembly Cisco TelePresence System 3000 OL-14521-01...
  • Page 120 Figure 7-5 Projector Assembly Cisco TelePresence System 3000 7-10 Chapter 7 Assembling the Remaining Cisco TelePresence Elements...
  • Page 121 Assembling the Remaining Cisco TelePresence Elements Parts List Step 6 Attach the VGA module to the center Table segment. The VGA module supports the VGA peripheral cable when not in use. Figure 7-6 VGA Module Cisco TelePresence System 3000 7-11 OL-14521-01...
  • Page 122 Chapter 7 Assembling the Remaining Cisco TelePresence Elements Parts List Step 7 Attach the center Privacy panel. Figure 7-7 Privacy Panel Assembly Rotated for clarity Cisco TelePresence System 3000 7-12 OL-14521-01...
  • Page 123 Chapter 7 Assembling the Remaining Cisco TelePresence Elements Parts List Step 8 Attach the left Privacy panel. Figure 7-8 Privacy Panel Assembly Rotated for clarity Cisco TelePresence System 3000 7-13 OL-14521-01...
  • Page 124 Chapter 7 Assembling the Remaining Cisco TelePresence Elements Parts List Step 9 Attach the right Privacy panel. Figure 7-9 Privacy Panel Assembly Rotated for clarity Cisco TelePresence System 3000 7-14 OL-14521-01...
  • Page 125 Chapter 7 Assembling the Remaining Cisco TelePresence Elements Parts List Step 10 Attach the right-wing Privacy panel. Figure 7-10 Privacy Panel Assembly Cisco TelePresence System 3000 7-15 OL-14521-01...
  • Page 126 Chapter 7 Assembling the Remaining Cisco TelePresence Elements Parts List Step 11 Attach the Cable management bars to the three Codecs. Figure 7-11 Codec Assembly Cisco TelePresence System 3000 7-16 OL-14521-01...
  • Page 127 Chapter 7 Assembling the Remaining Cisco TelePresence Elements Parts List Step 12 Attach the Codec attachment brackets to the three Codecs. Figure 7-12 Codec Assembly Cisco TelePresence System 3000 7-17 OL-14521-01...
  • Page 128 Attach the three Codecs to the Display structure Front foot stabilizers. If you ordered a Presentation Codec with your TelePresence system, refer to the Cisco TelePresence Note Hardware Options and Upgrade Guide for instructions to install your presentation codec. Figure 7-13 Codec Assembly Cisco TelePresence System 3000 7-18 OL-14521-01...
  • Page 129 Chapter 7 Assembling the Remaining Cisco TelePresence Elements Parts List Step 14 Attach the audio/video extension unit to its bracket. Figure 7-14 Audio/Video Extension Unit and Bracket Cisco TelePresence System 3000 7-19 OL-14521-01...
  • Page 130 Chapter 7 Assembling the Remaining Cisco TelePresence Elements Parts List Step 15 Attach the audio/video extension unit to the rear of the display assembly. Figure 7-15 Audio/Video Extension Unit Cisco TelePresence System 3000 7-20 OL-14521-01...
  • Page 131 Assembling the Remaining Cisco TelePresence Elements Parts List Step 16 Attach the Speaker board feet to the Speaker boards. The feet should angle towards the rear of the Display structure. Figure 7-16 Speaker Assembly Cisco TelePresence System 3000 7-21 OL-14521-01...
  • Page 132 Chapter 7 Assembling the Remaining Cisco TelePresence Elements Parts List Step 17 Attach the Speaker boards to the Speaker board brackets on the underside of the Display shelves. Figure 7-17 Speaker Assembly Cisco TelePresence System 3000 7-22 OL-14521-01...
  • Page 133 Chapter 7 Assembling the Remaining Cisco TelePresence Elements Parts List Step 18 Attach the Speakers to the Speaker boards. Figure 7-18 Speaker Assembly Cisco TelePresence System 3000 7-23 OL-14521-01...
  • Page 134 Please refer to your Cisco TelePresence Projector Screen Assembly manual for the exact Note procedures used to build the projector screen. The Projector Screen Assembly manual is included in the projector screen carton. Figure 7-19 Projector Screen Assembly Cisco TelePresence System 3000 7-24 Chapter 7 Assembling the Remaining Cisco TelePresence Elements OL-14521-01...
  • Page 135 Parts List Step 20 Attach the auxiliary control unit to its bracket using 5 mm screws; then, attach the unit and bracket to the rear of the display assembly. Figure 7-20 Auxiliary Control Unit Cisco TelePresence System 3000 7-25 OL-14521-01...
  • Page 136 When you slide the Camera target into the frame, make sure the target is centered in the frame between the vertical lines at the top and bottom of the target. Figure 7-21 Cisco TelePresence System 3000 7-26 Chapter 7 Camera Target Assembly...

  • Page 137: Routing Power And Signal Cables

    37-0848-01 37-0854-01 37-0877-01 37-0901-01 37-xxxx-xx Equipment” 37-0833-01 37-0852-01 Used for projector. 37-0853-01 51-4582-01 51-4536-01 51-0609-01 36-0244-01 37-0980-01 Packaged with Auxiliary Control unit Included with Included in Microphone kit 74-4743-xx “Region- and Country-Specific for specific part numbers. Cisco TelePresence System 3000...
  • Page 138 Correct routing of the various power cords to the PDUs and auxiliary control unit is critical for the safety and success of the Cisco TelePresence 3000. Route each power unit to a different 20 amp circuit to prevent circuit overload when all the electrical components are properly installed.
  • Page 139 Chapter 8 Routing Power and Signal Cables Power Requirements for the Cisco TelePresence 3000 Figure 8-1 PDU installation to left accessory cabinet Attach the right PDU to the right Accessory cabinet and connect the power cord for the PDU into the Step 2 power outlet.
  • Page 140 Chapter 8 Routing Power and Signal Cables Power Requirements for the Cisco TelePresence 3000 Figure 8-2 Right-side PDU installation to right accessory cabinet Attach the center PDU to the center privacy panel and connect the power cord for the PDU into the power Step 3 outlet.
  • Page 141 Chapter 8 Routing Power and Signal Cables Power Requirements for the Cisco TelePresence 3000 Figure 8-3 Table assembly PDU attachment to the center Privacy panel Note The PDU power cable should extend from the right side. Cisco TelePresence System 3000...
  • Page 142 Power Requirements for the Cisco TelePresence 3000 Step 4 Route the power cables for the table leg foam bumper I/O modules and the projector. Figure 8-4 Routing Power Cables for I/O Modules and Projector The six jumper cords from the I/O modules in the table legs route to the center PDU.
  • Page 143 Route the Table Leg Signal cables behind the Display structure, along with the other signal cables, but Note do not plug them into any Codec. Connect the codec power cables. Step 6 OL-14521-01 Power Requirements for the Cisco TelePresence 3000 Cisco TelePresence System 3000...
  • Page 144 Power Requirements for the Cisco TelePresence 3000 Figure 8-6 Routing the Codec Power Cables Power Connect the Cisco Unified IP Phone, VGA peripheral, and projector HD video cables. Step 7 The VGA Peripheral cable is the free-hanging cable resting in the VGA module attached to the center Note Table segment.
  • Page 145 Discharge each microphone cable by touching the metal cable-connector to the codec or audio/video extension unit cable as shown in Hold the cable connector to the codec or audio/video extension unit cable for 3 seconds. OL-14521-01 Power Requirements for the Cisco TelePresence 3000 IP Phone Signal VGA Peripheral Projector HD Video to Codec Figure 8-8.
  • Page 146 Chapter 8 Routing Power and Signal Cables Power Requirements for the Cisco TelePresence 3000 Immediately connect the microphone to the codec or audio/video extension unit using the diagram Figure 8-8. Figure 8-8 Discharging ESD from the Microphone Cables and Connecting the Microphone Cables and Microphones...
  • Page 147 Two dots on a white background indicate a left speaker. • Three dots on a red background indicate a right speaker. • Figure 8-9 shows the speaker cabling. Left and right are reversed. OL-14521-01 Power Requirements for the Cisco TelePresence 3000 Cisco TelePresence System 3000 8-11...
  • Page 148 Power Requirements for the Cisco TelePresence 3000 Figure 8-9 Cabling the Speakers Before plugging cables into the Codec, label each one. For example, Left Speaker, Center Speaker. Step 10 Connect the following cables: Attach and route the power cables for the lighting assembly by connecting the lights to the auxiliary •...
  • Page 149 Before plugging the Light fixture power cables into the auxiliary control unit, label each one. For example, 5’ Left light, 4’ Right light. OL-14521-01 Power Requirements for the Cisco TelePresence 3000 Auxiliary Control Unit Auxiliary Control Unit Auxiliary Control Unit...
  • Page 150 Cabling the Plasma displays Signal Power Note Figure 8-11 displays the rear view of the Cisco TelePresence System 3000. Left and right are reversed. Before you plug cables into a Codec or PDU, label each cable. Cisco TelePresence System 3000 8-14 Chapter 8...
  • Page 151 Figure 8-12 displays the rear view of the Cisco TelePresence System 3000. Left and right are reversed. Before you plug cables into a Codec, label each cable.
  • Page 152 Power Requirements for the Cisco TelePresence 3000 Step 13 Attach the ferrite cores to the ends of all six camera cables (both the video and Ethernet cables, 12 ferrite cores total). Wrap the cables around the ferrite as shown in approximately 1 1/2 inches (4 cm) from the connectors.
  • Page 153 Right Auxilliery Audio Expansion Unit First Row Center Microphone Speaker Figure 8-14 displays the rear view of the Cisco TelePresence System 3000. Left and right are reversed. Note OL-14521-01 Left Codec Right Codec Camera IP Phone Network Power Requirements for the Cisco TelePresence 3000...
  • Page 154 Power Requirements for the Cisco TelePresence 3000 Cable routing for the auxiliary control unit and projector for a standard CTS 3000 installation is shown Figure 8-15. Figure 8-15 Cable Routing for Standard CTS 3000 Projector Serial Video In Center Left Right...
  • Page 155 Chapter 8 Routing Power and Signal Cables Cable routing for a standard CTS-3000 installation that uses a presentation codec is shown in Figure 8-16. Refer to the TelePresence Hardware Options and Upgrade Guide Figure 8-16 Cable Routing for CTS-3000 with Presentation Codec...
  • Page 156 Power Requirements for the Cisco TelePresence 3000 Because you need to split the video signal between the projector and any additional video output, you Note must purchase at least one extra cable to connect optional external display(s). Cables for the external displays and document camera are not included with the standard Cisco TelePresence installation.
  • Page 157 Chapter 8 Routing Power and Signal Cables Figure 8-17 Cabling Diagram: CTS 3000 Installations with an External Display and Document Camera Projector Serial Video In Center Left Right Audio Expansion Unit Speaker First Row Center Microphone (Optional) If your installation uses an external display or a document camera with a presentation codec, Step 16 install and route the cabling.
  • Page 158 Power Requirements for the Cisco TelePresence 3000 Refer to the “Options for the Cisco TelePresence System 3000” Hardware Options and Upgrade Guide Because you need to split the video signal between the projector and any additional video output, you Note must purchase at least one extra cable to connect optional external display(s).
  • Page 159 Chapter 8 Routing Power and Signal Cables Figure 8-18 Cabling Diagram: CTS 3000 Installations with a Presentation Codec, External Display and Document Camera Projector Serial Video In Presentation Codec Signal Document Camera Signal Auxiliary Video In Video Out Center Left Right...
  • Page 160 Chapter 8 Routing Power and Signal Cables Power Requirements for the Cisco TelePresence 3000 Cisco TelePresence System 3000 8-24 OL-14521-01...

  • Page 161: First-Time Setup

    Power on the three PDUs in that are located on the accessory cabinets and the single PDU that is Step 1 underneath the first row table (near the projector). OL-14521-01 C H A P T E R Part Number 68-2900-xx 48-0654-01 Cisco TelePresence System 3000 Notes...
  • Page 162 9-2. You use that information to log in to the Cisco TelePresence System Administration. This IP address displays until you log in to Cisco TelePresence System Administration or use Secure Shell (SSH) to log in to the CTS 3000. Cisco TelePresence System 3000 Figure 9-1.
  • Page 163 Figure 9-2 Note If the IP address that displays is 192.168.100.2, the CTS-3000 could not contact the DHCP server or your system does not use DHCP. If your network does not use DHCP, navigate to Configuration > IP Settings, change the DHCP Enabled setting to No, and specify a static IP address, subnet mask, gateway and DNS server.

  • Page 164: Configuring An Alternate Tftp Server (Optional)

    To set up the CTS components, complete the following steps: Using the IP address displayed in the Cisco IP telephone welcome message, log in to the CTS Step 1 Administration software. Cisco TelePresence System 3000 Step 2 System” chapter of the Cisco TelePresence System Administrator's Guide...

  • Page 165: Setting Up The Displays

    In many cases, the color temperature is printed on the light bulb. If you are unable to ascertain the type and color temperature of light bulbs in the meeting room, experiment with color temperature settings until the color and images on the display screen look lifelike. OL-14521-01 Setting Up CTS Components Cisco TelePresence System 3000...
  • Page 166 No image. No image. No image. Cisco TelePresence System 3000 Possible Cause Video cable is not connected to its corresponding codec connector. Ethernet cable from secondary codec is not plugged into the correct port on the primary codec.

  • Page 167: Setting Up The Cameras

    Step 1 When you slide the Camera target into the frame, make sure the target is centered in the frame between the vertical lines at the top and bottom of the target. OL-14521-01 Setting Up CTS Components Cisco TelePresence System 3000...
  • Page 168 Attach the large target to the underside of the center table section by placing the round pads on the Step 2 underside of the clamps into recesses that are drilled under the table. You can feel under the table to find the small round recesses. Cisco TelePresence System 3000 Camera Target Assembly Chapter 9 First-Time Setup...

  • Page 169: Adjusting The Zoom

    If one of the left/right screws is covered by the camera cable, use the other screw to make Note all left/right adjustments. OL-14521-01 Figure 9-5. Figure 9-4. Cisco TelePresence System 3000 Setting Up CTS Components...
  • Page 170 Setting Up CTS Components Figure 9-4 Figure 9-5 Correct Camera Target Alignment—Center Display Note curved lines touching screen border Cisco TelePresence System 3000 9-10 Camera Adjustment Screws Left Right adjust adjust screw screw Camera rotation screw Up/down adjust screw Chapter 9...
  • Page 171 OL-14521-01 “Focusing the Camera” section on page Figure 9-4. “Focusing the Camera” section on page Setting Up CTS Components 9-13. Figure 9-6. Vertical line Red plus sign within black cross Red lines Table edge 9-13. Cisco TelePresence System 3000 9-11...
  • Page 172 Step 8 Click Setup, then click Auto Adjust to automatically adjust the camera settings. You will see various images and colors on the displays during the adjustment. Auto Adjust takes approximately 1 minute. Cisco TelePresence System 3000 9-12 Figure Figure 9-4.

  • Page 173: Focusing The Camera

    Figure 9-9 Positioning the Small and Large Targets Large target Small target Red and green horizontal bars OL-14521-01 5 ft Small target Cisco TelePresence System 3000 Setting Up CTS Components 10 ft rectangle Green rectangle 9-13...

  • Page 174: Attaching The Camera Hood Assembly

    Attaching the Camera Hood Assembly After you complete the camera adjustment, attach the camera hood assembly. See Attach the top hood before attaching the bottom hood. Note Cisco TelePresence System 3000 9-14 Location of Focus and Zoom Rings Zoom ring...
  • Page 175 In addition, make sure that you use screws of the correct length (20 mm). Overtightening the screws, or using a screw that is too long, can cause the plastic hoods to break. Figure 9-11 Attaching the Camera Hood Assembly Cisco TelePresence System 3000 9-15 OL-14521-01...
  • Page 176 Setting Up CTS Components Troubleshooting Cameras Table 9-2 to troubleshoot problems with cameras. Table 9-2 Problem Cisco TelePresence 3000/3200 only Camera image appears on the wrong display. Image not positioned correctly. Image colors are incorrect. No image. No image. Cisco TelePresence System 3000...

  • Page 177: Setting Up The Speakers

    Troubleshooting Speakers Table 9-3 Table 9-3 Problem No sound is heard. Cisco TelePresence 3000/3200 only Sound heard at wrong speaker. Sound is not synchronized with video. Setting Up the Microphones To verify correct microphone setup and calibrate the microphones, complete the following steps: Step 1 In the Cisco TelePresence administrative GUI, navigate to Hardware Setup >...
  • Page 178 Sound is muffled. Sound registers at the wrong microphone. No sound registers. Microphone icon with red pipe displays. Cisco TelePresence System 3000 9-18 Troubleshooting Chart for Microphone Problems Possible Cause Something near or on the microphone is distorting the sound.

  • Page 179: Setting Up The Projector

    Make sure that a serial cable is connected from your projector to the Serial 1 output of the auxiliary Step 1 control unit. See the “Options for the Cisco TelePresence System 3000” chapter of the Cisco TelePresence Hardware Options and Upgrade Guide with an Auxiliary Control Unit.
  • Page 180 To check either VGA or document camera input, perform the following steps: Step 8 Click Presentation Devices on the Hardware Setup window. Perform one of the following steps to test the video input: Cisco TelePresence System 3000 9-20 Chapter 9 First-Time Setup...

  • Page 181: Projector Setup For Systems Without An Auxiliary Control Unit

    Projector Setup for Systems Without an Auxiliary Control Unit To set up a projector for a CTS 3000 system that does not use an auxiliary control unit, complete the following steps: Start a test pattern display for the projector by completing the following steps: Step 1 Open a browser that is connected to the network.
  • Page 182 Press the Up Arrow and Down Arrow keys and highlight Screen. Press the Right Arrow key and select Screen to enter the Screen submenu. Press the Up Arrow and Down Arrow keys and highlight Normal. Cisco TelePresence System 3000 9-22 Chapter 9...
  • Page 183 Press the Right Arrow key to display the lens value setting tool. Press the Right Arrow until you reach 0, then press OK to return to the Image Adj submenu. Press the Left Arrow key to return to the main menu. OL-14521-01 Setting Up CTS Components Cisco TelePresence System 3000 9-23...
  • Page 184 Perform one of the following steps to test the video input: Click the VGA radio button to test input from a VGA device • Click the Document camera radio button to test input from the document camera • Cisco TelePresence System 3000 9-24 Chapter 9 First-Time Setup OL-14521-01...

  • Page 185: Troubleshooting Presentation Devices

    HD video input. If your system includes an Auxiliary Control Unit, click Set Projector Defaults. Remove any objects blocking the projector lens. Seat the video cable connector securely. Seat the video cable connector securely. Cisco TelePresence System 3000 9-25...

  • Page 186: Other Devices

    Click the Turn Selected Lights On/Off to test the selected light unit(s). – Click the Reset Auxiliary Control Unit to power cycle the Auxiliary Control Unit. – Cisco TelePresence System 3000 9-26 Troubleshooting Chart for Presentation Device Problems (continued) Possible Cause...

  • Page 187: Use & Care Guide

    Do not touch the camera after installation is completed. If you need to clean the camera lens, use a dry Caution microfiber cloth. After cleaning, you will need to realign the camera. OL-14521-01 C H A P T E R Cisco TelePresence System 3000 10-1...

  • Page 188: Maintaining The Projector

    Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Warning Installation of the equipment must comply with local and national electrical codes. Warning Cisco TelePresence System 3000 10-2 Chapter 10 Use & Care Guide “Replacing the Projector Lamp—Part Number...

  • Page 189: Field-Replaceable Unit Guide

    Revised: October 29, 2009, OL-14521-01 This chapter describes the steps you perform to replace the field-replaceable units (FRUs) for the Cisco TelePresence system and includes the following sections: Complete List of Spares for the Cisco TelePresence System 3000, page 11-1 • •...
  • Page 190 Cisco TelePresence System 3000 11-2 Description Camera lens use to upgrade a Cisco TelePresence system 3000 or 3010 to a Cisco TelePresence system 3200 or 3210, respectively Accessory kit for the Cisco TelePresence System 3010 Camera for the Cisco TelePresence System 3200 and 3210...
  • Page 191 Power and Ethernet connectivity for table legs—United Kingdom Loudspeaker and speaker cable for the Cisco TelePresence Systems 500, 1100, 1300, 3010, and 3210. This speaker does not work for the Cisco TelePresence System 3000 or 3200. Note High Fidelity Loudspeaker—All Systems except the Cisco TelePresence System 3000 and 3200—No speaker cable...

  • Page 192: Replacing The Camera Cluster-Part Number Cts3K-Cam-Clst-G2

    CTS-PWR-PDU= Replacing the Camera Cluster—Part Number CTS3K-CAM-CLST-G2= Required Information, Tools, and Equipment To remove and replace the camera cluster for the Cisco TelePresence 3000, you need the following information, tools, and equipment: Cisco TelePresence System Administrator's Guide • Release Notes for Cisco TelePresence System •...
  • Page 193 Power on the system by turning the power switches to the On position on the two left PDUs, single right PDU, and (if present) auxiliary control unit or PDU on the rear center of the display assembly. OL-14521-01 Replacing the Camera Cluster—Part Number CTS3K-CAM-CLST-G2= for more information. for more information. Cisco TelePresence System 3000 11-5...

  • Page 194: Replacing A Plasma Display-Part Number Cts-Disp-65-Gen4

    Replacing a Plasma Display—Part Number CTS-DISP-65-GEN4= Required Information, Tools, and Equipment To disassemble and reassemble portions of the Cisco TelePresence 3000 to replace a display, you need the following information, tools, and equipment: Release Notes for Cisco TelePresence System, Release 1.4, OL-12074-05 •...

  • Page 195: Powering Off The System

    If you are replacing the center Plasma display, you must remove the camera cluster. Refer to the previous section, Removing the Camera Cluster OL-14521-01 Replacing a Plasma Display—Part Number CTS-DISP-65-GEN4= 11-8. for this procedure. “Removing the Camera Step 15 “Removing the Left Tabletop Door Section” Cisco TelePresence System 3000 11-7...

  • Page 196: Removing The Left Tabletop Door Section

    Unscrew the right Display shelf from the two Display Shelf support brackets. Set aside the Display shelf. Step 12 Removing the Display Screen and Completing the Procedure Detach the display screen’s signal cable from the display and from the correct codec unit. Step 1 Cisco TelePresence System 3000 11-8 Procedure”. Procedure”. Chapter 11 Field-Replaceable Unit Guide “Removing the Display Screen and...
  • Page 197 Attach the display mounting bracket you removed from the original display using six screws, and remove the display handles. OL-14521-01 Replacing a Plasma Display—Part Number CTS-DISP-65-GEN4= Cables”, for cable locations and reference. Cables”, for cable locations and reference. Removing the Display Mounting Bracket Cisco TelePresence System 3000 11-9...
  • Page 198 If the replacement display has two DVI connectors, connect the signal cable supplied with the replacement display to the codec and to the left-most connector on the rear of the display (as viewed from the rear of the display), as shown in Cisco TelePresence System 3000 11-10 Attaching the Display Mounting Bracket Figure 11-4).
  • Page 199 Chapter 11 Field-Replaceable Unit Guide Replacing a Plasma Display—Part Number CTS-DISP-65-GEN4= Figure 11-3 Power and Signal Connections for Displays with HDMI Connectors Codec On/Off Switch AC inlet Cisco TelePresence System 3000 11-11 OL-14521-01...
  • Page 200 If required, attach the camera cluster. Chapter 7, “Assembling the Remaining Cisco TelePresence Elements” Power and Signal Step 17 Reassemble the display shelf sections. Chapter 5, “Building the Display Shelf Cisco TelePresence System 3000 11-12 AC inlet On/Off Switch Codec DMP Cables”.
  • Page 201 Step 30 OL-14521-01 Replacing a Plasma Display—Part Number CTS-DISP-65-GEN4= for more information. for your software release for more for more information. for your software release for more for more information. for more information. for more information. Cisco TelePresence System 3000 11-13...

  • Page 202: Replacing A Speaker-Part Number Cts-Ldspkr

    Replacing a Speaker—Part Number CTS-LDSPKR= Replacing a Speaker—Part Number CTS-LDSPKR= Required Information, Tools, and Equipment To remove and replace a speaker for the Cisco TelePresence 3000, you need the following information, tools, and equipment: Cisco TelePresence System Administrator's Guide •...
  • Page 203 Perform the speaker test. See Step 14 OL-14521-01 Replacing a Speaker—Part Number CTS-LDSPKR= for your software release for more Chapter 9, “Setting Up the Speakers” Cisco TelePresence System 3000 for more information. 11-15...

  • Page 204: Replacing A Codec Unit-Part Number Cts-Codec-Pri-G2= (Primary Codec) Or Cts-Codec-Sec= (Secondary Codec)

    Make sure to retain all screws, connectors, and other parts during the disassembly. Note From the back of the Cisco TelePresence 3000, access the codec to be removed. Turn the power switch Step 1 on the codec to the Off position.
  • Page 205 This prevents the secondary codecs from being affected by any software and peripheral upgrades to the primary codec. OL-14521-01 for additional information. for additional information. for additional information. for additional information. Cables”, for additional information. for detailed instructions. Cisco TelePresence System 3000 Step 11-17...

  • Page 206: Replacing A Microphone-Part Number Cts-Mic

    Replacing a Microphone—Part Number CTS-MIC= Replacing a Microphone—Part Number CTS-MIC= Required Information, Tools, and Equipment To remove and replace a microphone for the Cisco TelePresence 3000, you need the following information, tools, and equipment: Cisco TelePresence System Administrator's Guide •...

  • Page 207: Replacing A Microphone Without A Microphone Extension Cable

    Verify the status of the Cisco Unified Communications Manager (seen in the lower left portion of the window) is Enabled/Up. OL-14521-01 Replacing a Microphone—Part Number CTS-MIC= “Replacing a Microphone Without a to replace the microphone. “Replacing a to replace the microphone. Step for more information. Cisco TelePresence System 3000 11-19...

  • Page 208: Replacing A Microphone With A Microphone Extension Cable

    Cisco TelePresence Administrator window appears. Step 12 Verify the status of the Cisco Unified Communications Manager (seen in the lower left portion of the window) is Enabled/Up. Cisco TelePresence System 3000 11-20 Chapter 11 Field-Replaceable Unit Guide for your software release for more for more information.

  • Page 209: Replacing A Light Fixture-Part Number Cts-Light-Fixt

    “Setting Up the Microphones” section on page 9-17 Replacing a Light Fixture—Part Number CTS-LIGHT-FIXT= Required Information, Tools, and Equipment To disassemble and reassemble portions of the Cisco TelePresence 3000, you need the following information, tools, and equipment: Cisco TelePresence System Release 1.4 Administrator’s Guide, OL-13676-03 •...

  • Page 210: Replacing A Light Fixture

    Step 7 Replacing the Audio/Video Extension Unit—Part Number CTS-AV-EXP= To remove and replace the audio/video extension unit for the Cisco TelePresence 3000, you need the following tools and equipment: Medium Phillips head screwdriver (for attaching the unit to its bracket) •...

  • Page 211: Replacing The Cisco Ip Phone-Part Number Cp-7975G-Cts

    Cisco Unified Communications Manager Installation Guide for the Cisco TelePresence System for your software release. OL-14521-01 Figure 7-14 Figure 7-15 for more information. Replacing the Cisco IP Phone—Part Number CP-7975G-CTS= for additional information. “Setting Up the Microphones” section on for your software release Cisco TelePresence System 3000 11-23...

  • Page 212: Replacing The Projector Lamp-Part Number Cts-Prjtr-Bl-Gen1= Or Cts-Prjtr-Gen2-Ch (China)

    • Use the screwdriver to loosen the two screws that secure the lamp fixture in place. Step 7 Use the handles to remove the lamp module. Step 8 Cisco TelePresence System 3000 11-24 Chapter 11 Field-Replaceable Unit Guide Step OL-14521-01...

  • Page 213: Replacing The Projector-Part Number Cts-Prjtr-Gen1

    Remove the projector assembly by sliding the unit to the side until the projector mounting bracket Step 6 disengages from the loosened mounting screws. On some CTS 3000 models, you remove the projector assembly by sliding it to the front, rather than the Note side.

  • Page 214: Replacing A Pdu-Part Number Cts-Pwr-Pdu

    Enabled/Up. Choose System Restart to perform a software reset. Step 10 Refer to the Cisco TelePresence System Administrator's Guide information. Cisco TelePresence System 3000 11-26 Chapter 11 Field-Replaceable Unit Guide for more information. for your software release for more...

  • Page 215: Replacing The Auxiliary Control Unit-Part Number Cts-Light-Ctrl

    Refer to the Cisco TelePresence System Administrator's Guide information. OL-14521-01 Replacing the Auxiliary Control Unit—Part Number CTS-LIGHT-CTRL= “Options for the Cisco TelePresence System 3000” for the location of the auxiliary control unit. chapter of the Guide. for your software release for more...

  • Page 216: Replacing A Display Shelf

    Loosen the half-turn bolts on either side of the speaker boards. Step 5 Slip the speaker boards over the half-turn bolts and remove them from the work area. Step 6 Cisco TelePresence System 3000 11-28 Chapter 11 Field-Replaceable Unit Guide...
  • Page 217 Power on the system by turning the power switches to the On position on the two left PDUs, single right PDU, and (if present) auxiliary control unit or PDU on the rear center of the display assembly. OL-14521-01 Figure 5-5. for detailed instructions. Replacing a Display Shelf Figure Chapter 7, “Assembling the Remaining Cisco TelePresence System 3000 5-3, 11-29...

  • Page 218: Replacing A Table Top Section

    Move one of the table legs to allow access to the draw bolts or cam locks. Step 7 Make sure that the leg still supports both table top sections. Note Cisco TelePresence System 3000 11-30 for an exploded diagram of the parts for the door. for exploded drawings of the privacy panels.
  • Page 219 Chapter 6, “Building the Table Assembly” for microphone installation instructions. for table door installation instructions. Replacing a Table Top Section for the location of the draw bolts or Chapter 6, “Building the Table Assembly” Cisco TelePresence System 3000 11-31...
  • Page 220 Chapter 11 Field-Replaceable Unit Guide Replacing a Table Top Section Cisco TelePresence System 3000 11-32 OL-14521-01...

  • Page 221: Parts List Sorted By Carton

    10 m Cat6 Ethernet cable, blue Compliance sticker for plasma display Cable identification stickers Cisco TelePresence Meeting Quick Reference document Cisco TelePresence 3000 Assembly, Use & Care, and Field Replacement Unit Guide (pointer to online document) Chapter Parts List Reference...
  • Page 222 69-1813-xx 74-5247-01 37-0833-01 37-0852-01 48-2426-01 68-2433-xx 69-1691-01 74-4743-01 74-4787-01 Cisco TelePresence System 3000 Part Description Regulatory Compliance and Safety Information ESD wrist strap “Please close” label M8 x 30 mm screw M4 x 12 mm screws M4 washers M4 nuts...
  • Page 223 Chapter 7 Refer to Appendix C, “Region- and Country-Specific Equipment” specific part numbers. Chapter 5 Chapter 5 Chapter 7 Chapter 8 Chapter Parts List Reference Chapter 7 Chapter Parts List Reference Chapter 7 Chapter 7 Chapter 7 Cisco TelePresence System 3000...

  • Page 224: Carton 4 Of 44: Secondary Codec, 800-28202-Xx, Cts-Codec-Sec

    Carton 8 of 44: Speaker, 74-4740-xx, CTS-LDSPKR Sub-Kit ID Kit ID Number Number Part Number 74-4740-xx 74-4740-01 Cisco TelePresence System 3000 Part Description M5 x 12 mm screws Secondary Codec Part Description M5 x 12 mm screws Secondary Codec Part Description...

  • Page 225: Carton 9 Of 44: Speaker, 74-4740-Xx, Cts-Ldspkr

    Chapter 8 Refer to “Region- Country-Specific Equipment” specific part numbers. Chapter Parts List Reference Chapter 2 Chapter Parts List Reference Chapter 6 Chapter 7 Chapter 6 Chapter 5, 6 Chapter 2 Chapter 7 Chapter 5, 7 Cisco TelePresence System 3000...
  • Page 226 Carton 16 of 44: Front Foot Stabilizer, 69-1624-xx, CST3K-STRUCTURE Sub-Kit ID Kit ID Number Number Part Number 69-1624-xx 700-23359-xx Front foot stabilizer Cisco TelePresence System 3000 Part Description Part Description Part Description Part Description Appendix A Parts List Sorted by Carton Chapter Parts List...

  • Page 227: Carton 19 Of 44: Auxiliary Control Unit, Cts-Light-Ctrl

    Part Description 65-inch high-definition display Chapter Parts List Reference Chapter 2 Chapter Parts List Reference Chapter 5 Chapter 5 Chapter Parts List Reference Chapter 7 Chapter Parts List Reference Chapter 3 Chapter Parts List Reference Chapter 3 Cisco TelePresence System 3000...

  • Page 228: Carton 22 Of 44: Plasma Display, 74-4881-Xx, Cts-Disp-65-Gen

    Carton 25 of 44: Foam Bumpers, 69-1634-xx, CTS3K-STRUCTURE Sub-Kit ID Kit ID Number Number Part Number 69-1634-xx 700-24275-xx Metal packaging brace 800-28625-xx Molded foam bumper Cisco TelePresence System 3000 Part Description 65-inch high-definition display Part Description Part Description M6 x 10 mm screws Part Description Appendix A...
  • Page 229 Chapter 4 Chapter 4 Chapter 4 Chapter 4 Chapter 4 Chapter 4 Chapter 4 Chapter 4 Chapter 4 Chapter 4 Chapter 4 Chapter 4 Chapter 4 Chapter 4 Chapter 7 Chapter Parts List Reference Chapter 4 Cisco TelePresence System 3000...

  • Page 230: Carton 28 Of 44: Light Fixture, 74-5361-Xx, Cts-Light-Fixt

    Kit ID Number Number Part Number 69-1674-xx 700-23960-01 Horizontal bar 700-23961-01 Vertical bar 700-24320-01 Tabletop camera target: small 700-24321-01 Cardboard ruler 700-24323-01 Tabletop camera target: large Cisco TelePresence System 3000 A-10 Part Description CTS-Light-Fixt Part Description CTS-Light-Fixt Part Description CTS-Light-Fixt Part Description...
  • Page 231 Part Description Part Description Part Description Part Description Chapter Parts List Reference Chapter 2 Chapter Parts List Reference Chapter 7 Chapter 7 Chapter 7 Chapter Parts List Reference Chapter 2 Chapter Parts List Reference Chapter 2 Cisco TelePresence System 3000 A-11...
  • Page 232 Kit ID Number Number Part Number 69-1626-xx 700-23339-xx Display shelf support left 700-23340-xx Display shelf support right 700-23341-xx Codec safety tray Cisco TelePresence System 3000 A-12 Part Description Part Description Spare lights for light fixture Part Description Projector screen assembly...
  • Page 233 Chapter 6 Chapter 6 Chapter Parts List Reference Chapter 5, 6 Chapter Parts List Reference Chapter 5, 6 Chapter Parts List Reference Chapter 6 Chapter 6 Chapter 6 Chapter 5, 6 Chapter 6 Chapter 6 Cisco TelePresence System 3000 A-13...
  • Page 234 700-23602-xx Speaker board, left and right 700-23603-xx Speaker board, center 53-2904-02 700-23909-01 Wooden biscuits 53-2904-02 51-4539-01 53-2904-02 51-4579-01 Cisco TelePresence System 3000 A-14 Part Description Left tabletop hinge Cam lock rods Appendix A Parts List Sorted by Carton Chapter Parts List...
  • Page 235 Cisco TelePresence System 3000 Pallet Dimensions and Description Revised: October 29, 2009, OL-14521-01 The following chapter provides you with the dimensions of the pallets for the Cisco TelePresence System 3000. Table B-1 Pallet Number OL-14521-01 A P P E N D I X...
  • Page 236 Pallet Description Pallet Number Description of Contents Cisco TelePresence System 3000 Appendix B Cisco TelePresence System 3000 Pallet Dimensions and Description Assembly structure, display support shelves, and privacy panels Assembly structure brackets Tabletops, light fixtures, projector screen, and camera tuning target...
  • Page 237 Asia Pacific Part Description TelePresence Power Cord I/O modules: power/Ethernet OL-14521-01 Part Number PWR-CORD10-AP 37-0831-01 CTS-LAPCONN-AP 74-4861-01 A P P E N D I X Photo Cisco TelePresence System 3000...
  • Page 238 Argentina Argentina Part Description Part Number TelePresence Power Cord PWR-CORD10-AR 37-0841-01 I/O modules: power/Ethernet CTS-LAPCONN-AR 74-4866-01 Cisco TelePresence System 3000 Appendix C Region- and Country-Specific Equipment Photo OL-14521-01...

  • Page 239: Australia C

    Appendix C Region- and Country-Specific Equipment Australia Part Description Part Number TelePresence Power Cord PWR-CORD10-AU 37-0840-01 I/O modules: power/Ethernet CTS-LAPCONN-AU 74-4866-01 OL-14521-01 Photo Cisco TelePresence System 3000 Australia...
  • Page 240 Central Europe Central Europe Part Description Part Number TelePresence Power Cord PWR-CORD10-CE 37-0832-01 I/O modules: power/Ethernet CTS-LAPCONN-CE 74-4865-01 Cisco TelePresence System 3000 Appendix C Region- and Country-Specific Equipment Photo OL-14521-01...

  • Page 241: China C-

    Part Description Part Number TelePresence Power Cord PWR-CORD10-CN 37-0837-01 I/O modules: power/Ethernet CTS-LAPCONN-CN 74-4914-01 Projector 74-6687-01 Kit No. 69-1990-01 Projector mounting bracket 700-23824-03 Kit No. 69-1990-01 Center Privacy Panel 700-23334-02 Kit No. 69-1990-01 OL-14521-01 Photo Cisco TelePresence System 3000 China...
  • Page 242 India, UAE, South Africa India, UAE, South Africa Part Description Part Number TelePresence Power Cord PWR-CORD10-ID 37-0838-01 I/O modules: power/Ethernet CTS-LAPCONN-ID 74-4864-01 Cisco TelePresence System 3000 Appendix C Region- and Country-Specific Equipment Photo OL-14521-01...

  • Page 243: Israel C

    Appendix C Region- and Country-Specific Equipment Israel Part Description Part Number TelePresence Power Cord PWR-CORD10-ISR 37-0842-01 I/O modules: power/Ethernet CTS-LAPCONN-ISR 74-4863-01 OL-14521-01 Photo Cisco TelePresence System 3000 Israel...
  • Page 244 Italy Italy Part Description Part Number TelePresence Power Cord PWR-CORD10-ITA 37-0832-01 I/O modules: power/Ethernet CTS-LAPCONN-ITA 74-4865-01 Cisco TelePresence System 3000 Appendix C Region- and Country-Specific Equipment Photo OL-14521-01...

  • Page 245: Japan C-

    Appendix C Region- and Country-Specific Equipment Japan Part Description TelePresence Power Cord I/O modules: power/Ethernet OL-14521-01 Part Number Photo PWR-CORD10-JP 37-0847-01 CTS-LAPCONN-JP 74-4951-01 Japan Cisco TelePresence System 3000...

  • Page 246: North America

    North America North America Part Description TelePresence Power Cord I/O modules: power/Ethernet Cisco TelePresence System 3000 C-10 Part Number Photo PWR-CORD10-NA 37-0847-01 CTS-LAPCONN-NA 74-4868-01 Appendix C Region- and Country-Specific Equipment OL-14521-01...

  • Page 247: Switzerland C

    Appendix C Region- and Country-Specific Equipment Switzerland Part Description TelePresence Power Cord I/O modules: power/Ethernet OL-14521-01 Part Number Photo PWR-CORD10-SWI 37-0843-01 CTS-LAPCONN-SWI 74-4862-01 Switzerland Cisco TelePresence System 3000 C-11...

  • Page 248: United Kingdom

    United Kingdom United Kingdom Part Description Part Number TelePresence Power Cord PWR-CORD10-UK 37-0831-01 I/O modules: power/Ethernet CTS-LAPCONN-UK 74-4861-01 Cisco TelePresence System 3000 C-12 Appendix C Region- and Country-Specific Equipment Photo OL-14521-01...

This manual is also suitable for:

Telepresence 3000

Table of Contents