Cisco 3000 Use & Care Manual page 144

Power Requirements for the Cisco TelePresence 3000
Figure 8-6 Routing the Codec Power Cables
Power
Connect the Cisco Unified IP Phone, VGA peripheral, and projector HD video cables.
Step 7
The VGA Peripheral cable is the free-hanging cable resting in the VGA module attached to the center
Note
Table segment.
If you encounter any problems with the HD Video cable that runs between the projector and the codec,
Note
order the part number CTS-CAB-HDMI-HDMI as a replacement.
Cisco TelePresence System 3000
8-8
Chapter 8 Routing Power and Signal Cables
OL-14521-01