Cisco 3000 Use & Care Manual page 183

Chapter 9 First-Time Setup
d. Press the Right Arrow key and select Normal.
Press the Left Arrow key to confirm your selection.
e.
Eliminate overscan by completing the following steps:
Step 9
Press the Up Arrow and Down Arrow keys and highlight Picture adj.
a.
Press the Right Arrow key and select Picture adj. to enter the Picture Adjustment submenu.
b.
Press the Right Arrow key and select Overscan.
c.
Press the Left Arrow key and reduce the Overscan value to zero.
d.
Press the OK key to complete the Overscan setting.
e.
Press the Left Arrow key to confirm your selection.
f.
Set the lamp iris by completing the following steps:
Step 10
Press the Up Arrow and Down Arrow keys and highlight Image adj.
a.
b. Press the Right Arrow key and select Image adj. to enter the Image Adjustment submenu.
Press the Up Arrow and Down Arrow keys and highlight Advanced menu.
c.
d. Press the Right Arrow key and select Advanced menu.
Press the Up Arrow and Down Arrow keys and highlight Lamp iris.
e.
Press the Right Arrow key and select Lamp iris.
f.
Press the Right Arrow key and select Open.
g.
Press the OK key to complete the selection.
h.
Press the Left Arrow key to confirm your selection.
i.
Press the Up Arrow and Down Arrow keys and highlight Store.
j.
Press the Right Arrow key and select Store.
k.
The first of four icons should be highlighted.
Press the OK key.
l.
An arrow should point to Yes.
m. Press the OK key.
The icons for an open door should be highlighted.
n. Press the OK key.
Store should be highlighted.
Press the Left Arrow key to complete the Image adj. function.
o.
Press Menu to exit the menu.
p.
Set the lens iris by completing the following steps:
Step 11
From the main menu, use the Up Arrow and Down Arrow keys to highlight the Image Adj function.
a.
Press the Right Arrow key to select the Image Adj sub-menu.
Use the up and Down Arrow keys to select Lens Iris.
b.
Press the Right Arrow key to display the lens value setting tool. Press the Right Arrow until you
c.
reach 0, then press OK to return to the Image Adj submenu.
Press the Left Arrow key to return to the main menu.
d.
OL-14521-01
Setting Up CTS Components
Cisco TelePresence System 3000
9-23