Tools And Equipment List - Cisco 3000 Use & Care Manual

Chapter 1 Overview
Figure 1-2

Tools and Equipment List

To assemble the Cisco TelePresence 3000, you need the following tools and equipment:
Uncrating and Unpacking:
•
•
•
•
•
•
•
Cisco TelePresence System 3000 Structure, Accessory, and Adjustment Assembly:
•
Tip
•
•
•
•
•
•
•
•
•
•
•
•
* Recommended for best results
OL-14521-01
Cable Connection Labeling System
Claw hammer or small pry bar
Large Phillips screwdriver
Tin snips*
Pallet jack or hand cart (for moving component boxes to installation site)*
Safety gloves*
Safety glasses*
Box cutters*
Power screwdriver with 3, 4, 5, and 6 mm (standard or round) Allen bits, or standard 3, 4, 5, and
6 mm Allen wrenches
A round-head Allen bit can work at an angle instead of just straight out, a helpful feature in tight
spots.
Manual screwdrivers, #2 and #4 Phillips and flathead types
Metric wrenches, 10 to 15 mm
9/64-inch Allen wrench (included with speakers)
Tape measure
Level
Masking tape*
Tie wraps*
Knee pads or kneeling cushion*
Laptop computer attached to network (for troubleshooting or reference)*
Hand vacuum or facilities vacuum*
Stepladder*
Mechanical lift (optional, for hanging display screens)
Tools and Equipment List
Cisco TelePresence System 3000
1-5