Chapter 9 Routing Power And Signal Cables - Cisco 3200 Use And Care Manual

Chapter 6 Building the First Row Table Assembly
Figure 6-3
18
19
Note Steps for routing the Ethernet and power cables are in
The flange on the I/O module cover place is wider on the bottom than on the top.
Note
Assemble the I/O modules for the inner molded foam bumpers.
Step 4
OL-14521-01
Foam Bumper Assembly
21
25
20
22 23 24
Chapter 9, "Routing Power and Signal Cables."
Cisco TelePresence System 3200
Parts List
6-5