Chapter 8
Routing Power and Signal Cables
Step 5
Route the signal cables from the table assembly.
Figure 8-5
Routing Signal cables from the Table assembly
5
5
4
3
Route the Table Leg Signal cables behind the Display structure, along with the other signal cables, but
Note
do not plug them into any Codec.
Connect the codec power cables.
Step 6
OL-14521-01
Table Leg Signal
IP Phone Signal
Microphone Signal
Projector Signal
VGA Peripheral
Power Requirements for the Cisco TelePresence 3000
Cisco TelePresence System 3000
8-7