Cisco 3000 Use & Care Manual page 200

Replacing a Plasma Display—Part Number CTS-DISP-65-GEN4=
Figure 11-4 Power and Signal Connections for Displays with DVI Connectors
Hang the replacement Plasma display.
Step 12
Plug in the signal cable to the correct codec.
Step 13
See
Plug in the power cable to the correct PDU.
Step 14
See
Step 15 Align and level the display and add the black seam tape.
See
Step 16 If required, attach the camera cluster.
See
Power and Signal
Step 17 Reassemble the display shelf sections.
See
Cisco TelePresence System 3000
11-12
AC inlet
Chapter 8, "Routing Power and Signal
Chapter 8, "Routing Power and Signal
Chapter 3, "Mounting and Leveling the Plasma
Chapter 7, "Assembling the Remaining Cisco TelePresence Elements"
Cables".
Chapter 5, "Building the Display Shelf
On/Off Switch Codec DMP
Cables".
Cables".
Displays".
Assembly".
Chapter 11 Field-Replaceable Unit Guide
and Chapter 8, "Routing
OL-14521-01