Cisco 3000 Use & Care Manual page 115

Chapter 7 Assembling the Remaining Cisco TelePresence Elements
Key Part Description
3
Cardboard ruler
4 Vertical bar
5 Horizontal bar
6
M4 x 20 mm screws
Switch Bracket
There are two additional brackets included with the accessory cabinet in Carton 33: 700-23338-xx and 700-23344-xx.
Note
These brackets attach the optional Ethernet switch to the left accessory cabinet. If you ordered this switch, refer to
the Cisco TelePresence System Hardware Options & Upgrade Guide to install the switch.
Note that the key numbers restart for each element.
Note
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
The directions left and right refer to the assembly as you face it from the front.
Note
Some system components have metal and plastic edges with hard angles. These edges are exposed until
Caution
you complete system assembly. Use caution when you move around the system during assembly to avoid
contact with any exposed system edges.
OL-14521-01
Part Number Qty
700-24321-xx 1
700-23961-xx 2
700-23960-xx 2
48-0654-xx 4
Ctn Notes
32
(CTS3K-FU
R-MAPLE)
29
(CTS3K-M-
TABLE-G2)
32
(CTS3K-FU
R-MAPLE)
29
(CTS3K-M-
TABLE-G2)
32
(CTS3K-FU
R-MAPLE)
29
(CTS3K-M-
TABLE-G2)
1
Cisco TelePresence System 3000
Parts List
7-5