Connect Power And Network Cables - Cisco Room Kit EQX Installation Manual

15. Connect power and network cables

Connect amplifier to codec:
• Connect the cable between the amplifier and the codec
(D1). Route it as shown in the illustration.
Main network cable:
• Connect the network cable to the codec (E1). Use the
regular cable routes when leading the cable toward the
network wall socket.
Don't connect it to the wall socket yet.
Main power cable:
• Connect the cable to the power strip (E3). Use the regular
cable routes when leading the cable toward the network
wall socket.
Don't connect it to the wall socket yet.
D1
D15519.02 | 2024 JANUARY | Cisco Room Kit EQX Installation Guide
D1
E3
E1
D1
E1
D1
44
E1
Copyright © 2024 Cisco Systems, Inc. All rights reserved.