Power Requirements for the Cisco TelePresence 3000
Because you need to split the video signal between the projector and any additional video output, you
Note
must purchase at least one extra cable to connect optional external display(s). Cables for the external
displays and document camera are not included with the standard Cisco TelePresence installation.
Note
When you use the audio/video extension unit as a video splitter, connect port 1 of the "Video in"
connection from the codec, and port 4 of the "Video out" connection to the projector.
Cisco TelePresence System 3000
8-20
Chapter 8
Routing Power and Signal Cables
OL-14521-01