Cisco 3000 Use & Care Manual page 41

Chapter 4 Building the Lighting Assembly
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Some system components have metal and plastic edges with hard angles. These edges are exposed until
Caution
you complete system assembly. Use caution when you move around the system during assembly to avoid
contact with any exposed system edges.
Metal and plastic edges can be sharp. Cisco recommends you wear safety gloves and safety glasses when
Caution
attaching the lighting assembly.
The directions left and right refer to the assembly as you face the Plasma displays.
Note
OL-14521-01
Cisco TelePresence System 3000
Parts List
4-3