Cisco 3000 Use & Care Manual page 197

Chapter 11 Field-Replaceable Unit Guide
See Chapter 8, "Routing Power and Signal
Detach the display screen's power cable from the display and from the correct PDU.
Step 2
See Chapter 8, "Routing Power and Signal
Remove the black tape from the seam behind and between the display screens.
Step 3
Remove the left and right Display tilt brackets from the Display shelf supports.
Step 4
Using a minimum of two people, lift the Plasma display straight up to disengage the hooks on the back
Step 5
of the display from the horizontal mounting rod on the Display structure.
Remove the display mounting bracket by removing six screws. Set the bracket aside for use with the
Step 6
replacement display.
Figure 11-1
Step 7 Move the Plasma display out of the work area to a temporary location safe from potential damage.
Unpack the new display.
Step 8
Note
Step 9 Attach the display mounting bracket you removed from the original display using six screws, and remove
the display handles.
OL-14521-01
Removing the Display Mounting Bracket
Take care to minimize damaging the packaging material so it may be reused to package the old
display screen.
Replacing a Plasma Display—Part Number CTS-DISP-65-GEN4=
Cables", for cable locations and reference.
Cables", for cable locations and reference.
Cisco TelePresence System 3000
11-9