Chapter 6
Building the Table Assembly
Building the Table Assembly, Product ID CTS3K-M-TABLE-G2
Step 13
Attach the Microphones to the left, right, and center Table segments.
The center Microphone cable must be seated in the cable channel on the underside of the center Table
segment in order to properly install the Projector mounting bracket. You can use tape to secure it in place.
Steps for routing and connecting the microphone extension cables from the audio/video extension unit
Note
to the microphones are in
Chapter 8, "Routing Power and Signal Cables."
Figure 6-26
Microphone Assembly
26
28
27
Cisco TelePresence System 3000
6-30
OL-14521-01