Cisco 3000 Use & Care Manual page 175

Chapter 9 First-Time Setup
Setting Up CTS Components
Do not overtighten the screws, or use a power screwdriver to tighten the screws. The recommended
Caution
torque for the screws is 0.8N.m (7 inch-pounds).
In addition, make sure that you use screws of the correct length (20 mm). Overtightening the screws, or
using a screw that is too long, can cause the plastic hoods to break.
Figure 9-11 Attaching the Camera Hood Assembly
7
2
1
3
7
Cisco TelePresence System 3000
9-15
OL-14521-01