Cisco 3000 Use & Care Manual page 158

Power Requirements for the Cisco TelePresence 3000
Refer to the
Hardware Options and Upgrade Guide
Because you need to split the video signal between the projector and any additional video output, you
Note
must purchase at least one extra cable to connect optional external display(s). Cables for the external
displays and document camera are not included with the standard Cisco TelePresence installation.
Note When you use the audio/video extension unit as a video splitter, connect port 1 of the "Video in"
connection from the presentation codec, and port 4 of the "Video out" connection to the projector.
Cisco TelePresence System 3000
8-22
"Options for the Cisco TelePresence System 3000"
Chapter 8
chapter of the
for more information about the presentation codec.
Routing Power and Signal Cables
Cisco TelePresence
OL-14521-01