Makita SG150 Translation Of The Original Instruction Manual page 66

EN
g) When wheel is binding or when interrupting
a cut for any reason, switch off the power
tool and hold the power tool motionless
until the wheel comes to a complete stop.
Never attempt to remove the wheel from the
cut while the wheel is in motion otherwise
kickback may occur.
h) Do not restart the cutting operation in the
workpiece. Let the wheel reach full speed
and carefully re-enter the cut.
i) Support panels or any oversized workpiece
to minimize the risk of wheel pinching and
kickback.
j) Use extra caution when making a "pocket
cut" into existing walls or other blind areas.
2.7 Additional safety warnings
2.7.1 Operating personnel
requirements
•
People below the age of 16 may not use the
machine.
•
The operating personnel must be familiar
with the content of this instruction manual.
2.7.2 Workplace safety
•
Before chasing in load-bearing walls,
consult the responsible structural engineer,
architects or the site supervisors.
•
Secure the work area also behind openings
and cutouts.
•
Watch out for open and concealed electricity
cables, and water and gas pipes. Use
suitable detectors to find concealed utility
pipes and cables, or contact the local utility
company for advice.
•
Avoid causing situations where other people
can stumble or trip.
•
Secure the workpiece.
•
Avoid dust accumulation in the workplace.
•
Ensure adequate ventilation in closed
rooms.
•
Dust from materials such as coatings
containing lead, several types of wood,
minerals and metals can be harmful
to health and cause allergic reactions,
respiratory diseases and/or cancer.
f
f
f