Makita SC103D Instruction Manual
Cordless threaded rod cutter
Hide thumbs
Also See for SC103D:
- Instruction manual (77 pages) ,
- Instruction manual (61 pages) ,
- Instruction manual (44 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita SC103D
Summary of Contents for Makita SC103D
- Page 1 INSTRUCTION MANUAL Cordless Threaded Rod Cutter SC103D Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: SC103D Cutting capacities Mild steel W3/8, W5/16, W1/4, 3/8-16UNC, 5/16-18UNC, 1/4-20UNC, M10, M8, M6 Stainless steel W3/8, 5/16-18UNC, M8, M6 Overall length 180 mm Rated voltage D.C. 10.8 V - 12 V max Net weight 2.7 - 2.8 kg •... -
Page 3: Ec Declaration Of Conformity
Electrical safety Vibration Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any The vibration total value (tri-axial vector sum) deter- adapter plugs with earthed (grounded) power mined according to EN62841-2-8: tools. Unmodified plugs and matching outlets will Work mode: cutting threaded stainless steel rod (rod reduce risk of electric shock. size W3/8) Avoid body contact with earthed or grounded Vibration emission (a... - Page 4 Do not let familiarity gained from frequent use Keep handles and grasping surfaces dry, clean of tools allow you to become complacent and and free from oil and grease. Slippery handles ignore tool safety principles. A careless action and grasping surfaces do not allow for safe handling can cause severe injury within a fraction of a and control of the tool in unexpected situations.
- Page 5 CAUTION: Only use genuine Makita batteries. MISUSE or failure to follow the safety rules stated Use of non-genuine Makita batteries, or batteries that in this instruction manual may cause serious have been altered, may result in the battery bursting personal injury. causing fires, personal injury and damage. It will...
-
Page 6: Parts Description
PARTS DESCRIPTION Stationary mount Movable mount Cutting die Bolt Hook Shoulder strap base Hex Wrench Lamp (inside) (for optional accessory) Front face Switch trigger Reversing switch lever Rod guide Guide scale Clamping screw Cover 6 ENGLISH... -
Page 7: Functional Description
Overload protection FUNCTIONAL When the tool is operated in a manner that causes it to DESCRIPTION draw an abnormally high current, the tool automatically stops without any indication. In this situation, turn the tool off and stop the application that caused the tool to CAUTION: Always be sure that the tool is become overloaded. Then turn the tool on to restart. switched off and the battery cartridge is removed NOTE: Overload protection activates when you try to before adjusting or checking function on the tool. -
Page 8: Auto-Stop Function
Switch action NOTICE: Do not move the reversing switch lever when the switch trigger is being pulled. This may cause a damage to the tool. CAUTION: Before installing the battery car- tridge into the tool, always check to see that the To start the cutting operation, set the reversing switch switch trigger actuates properly and returns to lever to cutting position. - Page 9 Rod guide NOTE: Use a dry cloth to wipe the dirt off the lens of the lamp. Be careful not to scratch the lens of lamp, or it may lower the illumination. For a precise cutting, set the rod guide in position depending on the diameter of the threaded rod to be cut. NOTE: When the tool is overheated, the lamp will blink.
-
Page 10: Shoulder Strap
► 1 . Reversing switch lever Shoulder strap is useful for carrying the tool. Unscrew the bolts with the supplied hex wrench. CAUTION: Use only the Makita wrench provided with the tool. Using other wrenches may result in overtight- ening or insufficient tightening which causes personal injury. Set the cutting dies onto the mounts so that the two colored markings can be seen. -
Page 11: Operation
Secure the cutting dies with the bolts firmly. When cutting, place the threaded rod perpendicular to the cutting line as shown in the figure. The cutting dies are correctly installed if the arrows on them point each other. The dimensions of the cutting dies are the same but their thickness look different when seen from above. ► 1 . Cutting line ► 1 . Arrow 2. Cutting die 3. Thin side 4. Thick side NOTE: When cutting a threaded rod made of ductile metal such as stainless steel, burrs may be generated on the cut end. Remove burrs with a file in this case. - Page 12 Pull and hold the switch trigger until the cutting Cutting secured threaded rods is finished and the jaw of the cutting die comes to fully opened position. When cutting a threaded rod which is secured to the building struc- When cutting a long threaded rod which is hard to hold ture such as the ceiling, wall, floor, etc., follow the procedure below : by hand, place the tool as illustrated. The tool can be placed flat. The cover also can be used for supporting the end of the threaded rod.
-
Page 13: Maintenance
One cutting die has two cutting edges and thick side CAUTION: These accessories or attachments and thin side. Switch the installation positions of the cutting dies if you have not used the other sides of the are recommended for use with your Makita tool cutting edges. specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. - Page 16 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885754-224 www.makita.com 20190821...