Cisco ONS 15454 Procedure Manual page 5

Chapter 1 Install the Shelf and Backplane Cable
Note
Return to your originating procedure (NTP).
Step 5
DLP-A2 Inspect the Shelf Assembly
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Open the shelf using the pinned hex key. For more information, see the
Step 1
Compartment (Door)" task on page
Verify the following:
Step 2
•
•
If the pins are bent or broken, or the frame is bent, call your Cisco sales engineer for a replacement.
Step 3
Close the front door before installing.
Step 4
Return to your originating procedure (NTP).
Step 5
NTP-A2 Install the Shelf Assembly
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
March 2003
The fan-tray assembly is shipped separately.
This task verifies that all parts of the shelf assembly are in good condition.
Pinned hex (Allen) key for front door
DLP-A1 Unpack and Verify the Shelf Assembly, page 1-4
Required
Onsite
None
Pins are not bent or broken.
Frame is not bent.
This procedure describes how to reverse the mounting bracket and mount
shelf assemblies in a rack.
#2 Phillips screwdriver
Medium slot-head screwdriver
Small slot-head screwdriver
Pinned hex key
Two set screws (48-1003-XX)
NTP-A1 Unpack and Inspect the ONS 15454 Shelf Assembly, page 1-4
Required
Onsite
None
1-12.
Cisco ONS 15454 Procedure Guide, R4.0
NTP-A2 Install the Shelf Assembly
"DLP-A8 Open the Front Cabinet
1-5