Cisco ONS 15454 Procedure Manual page 18

Hide thumbs Also See for ONS 15454:

NTP-A5 Install the Electrical Interface Assemblies

Place the metal EIA panel over the card.

Step 2

Insert and tighten the nine perimeter screws (P/N 48-0358) at 8 to 10 lb. (3.6 to 4.5 kg) to secure the

Step 3

cover panel to the backplane.

Insert and tighten the twelve (BNC) or nine (high-density BNC) inner screws (P/N 48-0004) at 8 to 10

Step 4

lb. (3.6 to 4.5 kg) to secure the cover panel to the card and backplane.

Figure 1-5

installation.

Figure 1-5

Cisco ONS 15454 Procedure Guide, R4.0

1-18

shows a BNC EIA installation.

Installing the BNC EIA

Chapter 1

Figure 1-6 on page 1-19

shows high-density BNC EIA

Install the Shelf and Backplane Cable

March 2003