Included Materials - Cisco ONS 15454 Procedure Manual

Required Tools and Equipment
13.
14.
15.
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
The ONS 15454 is intended for installation in restricted access areas. A restricted access area is
Warning
where access can only be gained by service personnel through the use of a special tool, lock, key, or
other means of security. A restricted access area is controlled by the authority responsible for the
location.
The ONS 15454 is suitable for mounting on concrete or other noncombustible surfaces only.
Warning
Required Tools and Equipment
You need the following tools and equipment to install and test the ONS 15454.

Included Materials

The following materials are required and are shipped with the ONS 15454 shelf (wrapped in plastic).
The number in parentheses gives the quantity of the item included in the package.
•
•
•
•
•
•
•
•
•
•
•
Cisco ONS 15454 Procedure Guide, R4.0
1-2
NTP-A11 Install the Rear Cover, page
NTP-A12 Install Ferrites, page
NTP-A13 Perform the Shelf Installation Acceptance Test, page
determine if you have correctly completed all other procedures in the chapter.
#12-24 x 3/4 pan-head Phillips mounting screws (48-1004-XX, 48-1007-XX) (8)
#12 -24 x 3/4 socket set screws (48-1003-XX) (2)
T-handle #12-24 hex tool for set screws (1)
ESD wrist strap with 1.8 m (6 ft) coil cable (1)
Tie wraps (10)
Pinned hex (Allen) key for front door (1)
Spacers (50-1193-XX) (4)
Spacer mounting brackets (2)
Clear plastic rear cover (1)
External (bottom) brackets for the fan-tray air filter
Standoff kit (53-0795-XX):
– Plastic fiber management guides (2)
Fan filter bracket screws (53-48-0003) (6)
–
Chapter 1
1-55—Complete this procedure to install the rear cover.
1-57—Complete this procedure to attach ferrites to power cables.
Install the Shelf and Backplane Cable
1-60—Complete this procedure to
March 2003