Cisco ONS 15454 Procedure Manual page 13

Chapter 1 Install the Shelf and Backplane Cable
Figure 1-3
Step 4 Return to your originating procedure (NTP).
DLP-A9 Remove the Front Door
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Open the door.
Step 1
To remove the door ground strap (available in Release 3.3 and later), perform the following:
Step 2
a.
March 2003
Cisco ONS 15454 Front Door
Viewholes for Critical, Major and Minor alarm LEDs
Use this task to remove the front cabinet compartment door.
Open-end wrench
DLP-A8 Open the Front Cabinet Compartment (Door), page 1-12
Required
Onsite
None
To detach the ground strap from the front door, loosen the #6 kep nut (49-0600-01) using the
open-end wrench. Detach the end of the ground strap terminal lug (72-3622-01) from the male stud
on the inside of the door.
NTP-A3 Open and Remove the Front Door
CISCO ONS 15454
O p t i c a l N e t w o r k S y s t e m
Door lock
Door button
Cisco ONS 15454 Procedure Guide, R4.0
1-13