Ii-1-2-4 Details Page For Mpoa/Static Or Dynamic Ip In Wan1 (Physical Mode: Adsl) .88 Ii-1-2-5 Details Page For Pppoe In Wan2 (Physical Mode: Ethernet) - Draytek Vigor2862 Series User Manual

I I - 1 - 2 - 5 D
I I - 1 - 2 - 5 D
To choose PPPoE as the accessing protocol of the Internet, please select PPPoE from the
WAN>>Internet Access >>WAN2 page. The following web page will be shown.
Available settings are explained as follows:
Item
Enable/Disable
ISP Access Setup
WAN Connection
Detection
92
e t a i l s P a g e f o r P P P
e t a i l s P a g e f o r P P P
Description
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you
adjusted in this page will be invalid.
Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP.
Username – Type in the username provided by ISP in this
field.
The maximum length of the user name you can set is 63
characters.
Password – Type in the password provided by ISP in this field.
The maximum length of the password you can set is 62
characters.
More Options - Click it to display router name and domain
name items.

Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping Detect.
Mode – Choose ARP Detect or Ping Detect for the system to
o E i n W A N 2 ( P h y s i
o E i n W A N 2 ( P h y s i
Service Name - Enter the description of the specific
network service.
c a l M o d e : E t h e r n e t )
c a l M o d e : E t h e r n e t )
Vigor2862 Series User's Guide