Draytek Vigor2862 Series User Manual page 55

M P o A /
M P o A /
1. Choose WAN1 as WAN Interface and click the Next button; you will get the following
page.
Available settings are explained as follows:
Item
Protocol
For ADSL Only
Fixed IP
IP Address
Subnet Mask
Default Gateway
Primary DNS
Vigor2862 Series User's Guide
S t a t i c o r D y n a m i c I P
S t a t i c o r D y n a m i c I P
Description
There are two modes offered for you to choose for WAN1
interface.
Choose MPoA / Static or Dynamic IP as the protocol.
Such field is provided for ADSL only. You have to choose
encapsulation and type the values for VPI and VCI. Or, click
Auto detect to find out the best values.
Click Yes to enable Fixed IP feature.
Type the IP address if Fixed IP is enabled.
Type the subnet mask.
Type the IP address as the default gateway.
Type in the primary IP address for the router.
39