Draytek Vigor2862 Series User Manual page 615

Once the device is managed (controlled) by Vigor2862 series, it will be displayed on such
screen automatically. If not, refer to sections "How to manage the CPE (router) through
Vigor2862?" for more detailed information.
V I I - 5 - 4 L
V I I - 5 - 4
This page offers brief information to identify the CPE connected to Vigor2862 series.
Available settings are explained as follows:
Item
Display Mode
Device Name
Description Name
Time & date
Action Type
Message
The Alert page offers brief information to identify the CPE connected to Vigor2862 series.
Vigor2862 Series User's Guide
o g & A l e r t
L o g & A l e r t
Description
Choose the mode you want to display the related information
on the following table.


Display the name of the managed CPE.
Display the brief explanation for the managed CPE.
Display the time and date that the managed CPE scanned by
Vigor2862 series.
Display the action that Vigor2862 series will perform for the
managed CPE.
Display the information for each event.
Stop record when fulls – when the capacity of CVM log is
full, the system will stop recording.
Always record the new event – only the newest events
will be recorded by the system.
599