Draytek Vigor2862 Series User Manual page 740

Vdsl2 security firewall

Hide thumbs Also See for Vigor2862 Series:

Table of Contents

ICMP/UDP/TCP/ANY- Specify a protocol for diagnosis.

Src IP – Type an IP address as the source IP.

Dst IP – Type an IP address as the destination IP.

Dst Port – Use the drop down list to specify the destination

Analyze – Click it to perform the job of analyzing. The

analyzed result will be shown on the page..

It is available when Analyze multiple packets.. is selected as

Select – Click the download link to get a blank example file.

Then, click such button to select that blank ".csv" file for

saving the result of analysis.

Analyze – Click it to perform the job of analyzing. The

analyzed result will be shown on the page. If required, click

export analysis to export the result as a file.

Note that the analysis was based on the current

"load-balance/route policy" settings, we do not guarantee it

will be 100% the same as the real case.

Vigor2862 Series User's Guide

Show Quick Links

Table of Contents