Draytek Vigor2862 Series User Manual page 105

IP Network Settings
Vigor2862 Series User's Guide
provided by ISP.
VPI - Type in the value provided by ISP.
VCI - Type in the value provided by ISP.
Modulation –Default setting is Multimode. Choose the one
that fits the requirement of your router.
This group allows you to obtain an IP address automatically
and allows you type in IP address manually.
Obtain an IP address automatically – Click this button to
obtain the IP address automatically.

More Options - Click it to display router name and
domain name items.

Router Name – Type in the router name provided
by ISP.

Domain Name – Type in the domain name that you
have assigned.
DHCP Client Identifier - Check the box to specify username
and password as the DHCP client identifier for some ISP.

Username: Type a name as username. The
maximum length of the user name you can set is
63 characters.

Password: Type a password. The maximum length
of the password you can set is 62 characters.
Specify an IP address – Click this radio button to specify
some data.

IP Address – Type in the private IP address.

Subnet Mask – Type in the subnet mask.

Gateway IP Address – Type in gateway IP address.
WAN IP Alias - If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 32 public IP addresses other
than the current one you are using. Notice that this setting is
available for WAN1 only. Type the additional WAN IP address
and check the Enable box. Then click OK to exit the dialog.
89