Draytek Vigor2862 Series User Manual page 521

Status
After finished the above settings, click OK to save the configuration.
F o r B u t t
F o r B u t t
The Factory Reset and Wireless ON/OFF/WPS buttons on the front panel are enabled by
default and can be enabled or disabled if required. Disabling the Factory Reset button will
prevent tampering by unauthorized parties, or to avoid accidental triggering of a router reset
when being used wake up LEDs. Disabling the wireless button will prevent changing the
wireless setting when LED Sleep Mode is enabled, and the buttons are primarily used to turn
the LEDs on and off.
Click the Button tab to get the following page.
Available settings are explained as follows:
Item
Refresh
Enable Factory Reset
Button
Vigor2862 Series User's Guide
o n
o n
Shows the status of the LEDs:
mode. To wake them up, do one of the following:
press the Wake up LED button on this page

press the Wireless On/Off/WPS button on the front

panel
press the Factory Reset button on the front panel.

– LEDs are awake. To put them to sleep immediately
 press the LED sleep immediately button on this page
press the Factory Reset button on the front panel for 1

second.
Description
Click to refresh the page to display the latest information.
The default value is Enabled.
Deselect to disable the reset function of the factory reset
– LEDs are in sleep
505